Triton Three+ - Speaker GoldenEar - Free user manual and instructions
Find the device manual for free Triton Three+ GoldenEar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floor-standing loudspeaker with built-in powered subwoofer |
| Dimensions (H x W x D) | 43.2" x 8.2" x 12.5" (1097 x 208 x 318 mm) |
| Weight | 48 lb (21.8 kg) |
| Power Requirement | AC 120V/240V (subwoofer amplifier) |
| Tweeter | High-Velocity Folded Ribbon (HVFR) tweeter |
| Mid/Bass Drivers | Four 4.5" (114 mm) multi-vaned phase plug drivers |
| Built-in Subwoofer | Dual 5.25" (133 mm) quadracoupler subwoofers with 1200W DSP-controlled amplifier |
| Frequency Response | 25 Hz – 35 kHz |
| Sensitivity | 90 dB (2.83V/1m) |
| Impedance | Nominal 4 ohms |
| Recommended Amplifier Power | 20 – 500 Wpc |
| Crossover Frequency | Adjustable low-pass subwoofer crossover (40 – 150 Hz) |
| Inputs | Gold-plated binding posts (bi-wire / bi-amp capable) |
| Finish | Black lacquer with high-gloss front baffle |
| Cleaning | Wipe with a soft, dry cloth; do not use liquids or cleaners |
| Safety | Do not expose to rain or moisture; keep ventilation slots unobstructed |
| Spare Parts / Repairability | No user-serviceable parts; contact authorized service center |
| General Information | Designed in the USA; magnetically shielded for TV proximity |
Frequently Asked Questions - Triton Three+ GoldenEar
What is the best placement for the Triton Three+ speakers?
Place the speakers at least 2 feet from walls to allow rear subwoofer ports to breathe. Angle them slightly toward the listening position for optimal imaging.
Do the Triton Three+ speakers require a break-in period?
Yes, allow 40-100 hours of playback at moderate volume for the drivers and subwoofer suspension to reach optimal performance.
Can I use the Triton Three+ with a surround sound receiver?
Yes, they are full-range speakers. Connect them as front left/right speakers. Ensure your receiver can handle a 4-ohm nominal load.
Do I need to connect the power cord for the subwoofer to work?
Absolutely. The built-in subwoofer amplifier requires AC power. Plug the included cord into a wall outlet, not a switched outlet on the receiver.
Can I bi-wire or bi-amp the Triton Three+?
Yes, the binding posts are gold-plated and separated for bi-wiring or bi-amping. Remove the jumper bars to split the connections.
How do I adjust the subwoofer level and crossover?
Use the controls on the rear panel: Subwoofer Level and Low-Pass Crossover. Start with crossover at 80 Hz and level at 12 o'clock, then adjust to taste.
What amplifier power do you recommend?
Amplifiers rated 20-500 watts per channel are suitable. The speakers are efficient (90 dB) but benefit from clean power for dynamic peaks.
Why is there no sound from the subwoofer?
Check that the speaker is plugged into AC power and the power switch is on. Also ensure the Subwoofer Level control is not turned fully down. If still no sound, try a different outlet.
How should I clean the speakers?
Use a soft, dry microfiber cloth to gently wipe the cabinet. For the grille, use a low-suction vacuum with a brush attachment. Never use liquids or abrasive cleaners.
What is the warranty for GoldenEar Triton Three+?
GoldenEar provides a 5-year limited warranty for the drivers and cabinet, and 3 years for the electronic components. Keep your original receipt.
User questions about Triton Three+ GoldenEar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Triton Three+ - GoldenEar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Triton Three+ by GoldenEar.
USER MANUAL Triton Three+ GoldenEar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GoldenEar
Model : Triton Three+
Category : Speaker