WV-S65301-Z1S - Surveillance Camera i-PRO - Free user manual and instructions
Find the device manual for free WV-S65301-Z1S i-PRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Surveillance Camera |
| Model | WV-S65301-Z1S |
| Brand | i-PRO (Panasonic) |
| Image Sensor | 1/2.8-inch CMOS |
| Resolution | 5 Megapixels (3072 x 1728) |
| Frame Rate | Up to 30 fps at 5MP |
| Lens | 2.8-10mm varifocal, F1.3 |
| IR Distance | Up to 40m |
| Day/Night | ICR auto switch |
| Video Compression | H.265, H.264, MJPEG |
| Smart Features | Smart Coding, Smart VCA, Privacy Mask |
| Network Protocols | IPv6, IPv4, HTTP, HTTPS, RTSP, ONVIF |
| Audio | Two-way audio (mic in/out) |
| Alarm I/O | 2 inputs, 1 output |
| Power Supply | 12V DC / PoE (IEEE 802.3af/at) |
| Power Consumption | 7.5W typical, 10.5W max (with IR) |
| Dimensions (W x H x D) | 74 x 61 x 152 mm |
| Weight | Approx. 350 g |
| Operating Temperature | -30°C to +50°C |
| Ingress Protection | IP66, IK10 |
| Mounting | Wall or ceiling mount bracket included |
| Included Accessories | Mounting template, screws, LAN extension cable |
| Compliance | CE, FCC, UL |
| Software | i-PRO Configuration Tool, VMS compatible |
Frequently Asked Questions - WV-S65301-Z1S i-PRO
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for at least 5 seconds until the status LED blinks. The camera will reboot with factory settings. You may need to reconfigure IP address and other settings.
What is the maximum resolution of the WV-S65301-Z1S?
The camera supports a maximum resolution of 5 Megapixels (3072x1728) at up to 30 frames per second. It also supports lower resolutions for bandwidth savings.
Can I use this camera outdoors?
Yes, the camera has IP66 and IK10 ratings, making it suitable for outdoor use. It is weatherproof and vandal-resistant.
Does the camera support Power over Ethernet (PoE)?
Yes, the camera supports PoE (IEEE 802.3af/at) as well as 12V DC input. This simplifies installation by allowing power and data over a single cable.
What is the IR range of this camera?
The built-in IR LEDs provide illumination up to 40 meters in total darkness, enabling clear night vision.
How do I access the camera remotely?
Assign a static IP to the camera and forward ports (e.g., 80/443) on your router. Use the i-PRO Configuration Tool or a web browser to access the camera via its IP address. For secure access, enable HTTPS.
Can I record video without an NVR?
Yes, the camera supports SD card recording (optional) and can also stream to network storage using NAS or FTP. For continuous recording, an NVR or VMS is recommended.
What video compression formats are supported?
The camera supports H.265, H.264, and MJPEG. H.265 offers the best compression efficiency, reducing bandwidth and storage requirements.
How do I update the firmware?
Download the latest firmware from the i-PRO website. Access the camera's web interface, go to Maintenance or Upgrade, and upload the firmware file. Do not power off during update.
What is Smart VCA?
Smart VCA (Video Content Analysis) enables advanced motion detection, line crossing detection, intrusion detection, and more. It reduces false alarms by filtering out irrelevant motion.
User questions about WV-S65301-Z1S i-PRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual WV-S65301-Z1S - i-PRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WV-S65301-Z1S by i-PRO.
USER MANUAL WV-S65301-Z1S i-PRO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : i-PRO
Model : WV-S65301-Z1S
Category : Surveillance Camera