ElectraPix Bar 16 - Uncategorized American DJ - Free user manual and instructions
Find the device manual for free ElectraPix Bar 16 American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Bar |
| Brand | American DJ |
| Model | ElectraPix Bar 16 |
| Dimensions (L x W x H) | 1000 mm x 50 mm x 100 mm |
| Weight | 5 kg |
| Power Consumption | 100 W |
| Power Supply | 100-240V AC, 50/60 Hz |
| LED Quantity | 16 |
| LED Color | RGBW (Red, Green, Blue, White) |
| Beam Angle | 45 degrees |
| DMX Channels | 16 or 32 selectable |
| Control Protocol | DMX512 |
| Operating Modes | DMX, Master/Slave, Sound Active, Auto Program |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% smooth dimming |
| Housing Material | Aluminum and polycarbonate |
| Cooling | Fan cooled and convection |
| IP Rating | IP20 (indoor use only) |
| Mounting Options | Floor stand, truss clamp, or hanging |
| Included Accessories | Power cord, mounting brackets, user manual |
| Cleaning Instructions | Wipe with a dry, lint-free cloth. Do not use solvents. |
| Safety Features | Overheat protection, safety cable attachment point |
| Spare Parts | LED modules, power supply unit available separately |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - ElectraPix Bar 16 American DJ
How do I connect the ElectraPix Bar 16 to a DMX controller?
Use a standard DMX cable to connect from the DMX OUT of the controller to the DMX IN of the fixture. Set the DMX address using the menu buttons on the back panel. Refer to the manual for addressing modes.
What is the power consumption of the ElectraPix Bar 16?
The fixture consumes approximately 100W at full brightness. It operates on 100-240V AC, 50/60 Hz.
Can the ElectraPix Bar 16 be used outdoors?
No, it has an IP20 rating and is designed for indoor use only. Exposure to moisture or dust may damage the fixture.
How do I clean the ElectraPix Bar 16?
Always disconnect from power before cleaning. Use a dry, lint-free cloth to wipe the housing and lenses. Do not use abrasive cleaners or liquids.
What mounting options are available for the ElectraPix Bar 16?
The fixture can be placed on a floor stand, clamped to a truss, or hung using the provided mounting brackets. Ensure the mounting surface can support the weight (5 kg).
How do I set up master/slave mode?
Connect multiple fixtures via DMX cables. Set one fixture as master (choose 'Master' in the menu) and the others as slave. The master will control the slaves simultaneously.
What is the beam angle of the ElectraPix Bar 16?
The beam angle is approximately 45 degrees, providing a wide wash effect.
Can I replace the LEDs if one fails?
The LEDs are not user-replaceable. Contact American DJ customer service for repair options. Spare LED modules may be available.
Does the fixture have a strobe function?
Yes, it has a strobe effect with adjustable rate from 0 to 20 Hz, controllable via DMX or built-in programs.
How many DMX channels does the ElectraPix Bar 16 use?
It supports two channel modes: 16-channel (basic RGBW control) and 32-channel (pixel mapping mode). Select the mode via the menu.
User questions about ElectraPix Bar 16 American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ElectraPix Bar 16 - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ElectraPix Bar 16 by American DJ.
USER MANUAL ElectraPix Bar 16 American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : ElectraPix Bar 16
Category : Uncategorized