Stage Blinder FLEX Blaze - Lighting Showtec - Free user manual and instructions
Find the device manual for free Stage Blinder FLEX Blaze Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Blinder / Strobe |
| Brand | Showtec |
| Model | Stage Blinder FLEX Blaze |
| LED Source | 4 x 30W RGBW LEDs |
| Power Consumption | 120W |
| Power Supply | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 470 x 190 x 310 mm |
| Weight | 6.5 kg |
| DMX Channels | 4 / 8 / 12 channel modes |
| Control Protocols | DMX512, master/slave, sound activation, auto programs |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% linear dimming |
| Beam Angle | 60 degrees (asymmetric spread) |
| IP Rating | IP20 (indoor use only) |
| Cooling | Fan-cooled |
| Housing Material | Metal (steel / aluminum) |
| Color | Black |
| Mounting | Floor standing or truss (via omega brackets) |
| Maintenance | Clean with a dry, lint-free cloth; do not use liquids |
| Safety | Disconnect power before servicing; replace only with specified fuse type |
| Spare Parts Availability | Contact authorized Showtec dealers |
| General Information | For indoor professional use; not for residential or outdoor use |
Frequently Asked Questions - Stage Blinder FLEX Blaze Showtec
How do I set the DMX address on the Stage Blinder FLEX Blaze?
Press the MENU button until 'DMX Address' appears on the display. Use the UP/DOWN buttons to select the desired address (1-512). Press ENTER to confirm.
What are the available DMX channel modes?
The fixture offers three channel modes: 4-channel (basic RGBW), 8-channel (extended with strobe and dimmer), and 12-channel (full control including macros). Select via the menu under 'Channel Mode'.
How do I clean the Stage Blinder FLEX Blaze?
Use a dry, lint-free cloth to gently wipe the housing and lenses. Do not use any liquids, solvents, or abrasive cleaners as they may damage the fixture.
Why is the fixture not responding to DMX?
Ensure the DMX cable is properly connected and terminated. Check that the DMX address is set correctly and not overlapping with other fixtures. Verify the controller is sending data.
Can I use the Stage Blinder FLEX Blaze outdoors?
No, the fixture is rated IP20 and designed for indoor use only. Exposure to moisture or dust may cause electrical shock or damage.
How do I reset the fixture to factory defaults?
Go to the menu and select 'Factory Reset'. Confirm by pressing ENTER. The fixture will reboot with default settings.
What type of power connector does the fixture use?
The fixture comes with a standard IEC power inlet (PowerCON compatible). Use the included power cord with a suitable plug for your region.
How do I replace the fuse?
Disconnect the fixture from power. Locate the fuse holder near the power inlet. Use a flathead screwdriver to open it. Replace with a fuse of the same type and rating (e.g., T2A/250V). Close and reconnect power.
Can the Stage Blinder FLEX Blaze be controlled without DMX?
Yes, it has standalone modes: sound activation (via built-in microphone), master/slave (connect multiple units), and auto programs (pre-defined light shows). Select via the menu.
What is the maximum ambient operating temperature?
The fixture is designed to operate in ambient temperatures from -10°C to 40°C (14°F to 104°F). Do not use in environments exceeding 40°C.
User questions about Stage Blinder FLEX Blaze Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Stage Blinder FLEX Blaze - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stage Blinder FLEX Blaze by Showtec.
USER MANUAL Stage Blinder FLEX Blaze Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : Stage Blinder FLEX Blaze
Category : Lighting