PT-REZ12 - Projector PANASONIC - Free user manual and instructions
Find the device manual for free PT-REZ12 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Projector |
| Brand | Panasonic |
| Model | PT-REZ12 |
| Display Technology | 3LCD |
| Resolution | WUXGA (1920 x 1200) |
| Brightness | 6000 lumens |
| Contrast Ratio | 3000:1 |
| Lamp Type | UHM |
| Lamp Life (Normal Mode) | 3000 hours |
| Dimensions (W x H x D) | 17.3 x 5.2 x 11.8 inches (440 x 132 x 300 mm) |
| Weight | 16.5 lbs (7.5 kg) |
| Power Consumption | 500 W (Standby: 0.5 W) |
| Input Terminals | HDMI, DVI-D, RGB, Composite, S-Video, Audio |
| Keystone Correction | Vertical: ±30°, Horizontal: ±20° |
| Lens Shift | Vertical: ±60%, Horizontal: ±30% |
| Noise Level | 35 dB (Normal mode) |
| Cleaning | Clean air filter every 100 hours; clean lens with soft cloth |
| Safety | Automatic power shutoff, security lock slot |
| Accessories Included | Remote control, batteries, power cord, VGA cable |
Frequently Asked Questions - PT-REZ12 PANASONIC
How do I replace the lamp on the Panasonic PT-REZ12?
Turn off the projector and unplug it. Wait 30 minutes for the lamp to cool. Open the lamp cover on the side, loosen the lamp screws, remove the old lamp, insert the new lamp (model ET-LAA410), and tighten the screws. Reset the lamp timer in the menu.
What is the recommended cleaning procedure for the air filter?
Clean the air filter every 100 hours of use. Remove the filter cover, take out the filter, wash it with mild detergent and water, dry it completely, and reinstall. Do not operate without the filter.
Can I connect my laptop to the PT-REZ12?
Yes, use an HDMI or VGA cable. Connect one end to your laptop and the other to the projector's HDMI or RGB input. Select the corresponding input source using the remote or projector buttons.
How do I adjust the image size and focus?
Use the zoom ring on the lens to adjust image size, and the focus ring for sharpness. For digital zoom, press the 'Zoom' button on the remote and use the arrow keys.
My projector displays a blank or no image. What should I check?
Check that the lens cap is removed, the power is on, the input source is correct, and the brightness/contrast settings are not turned down. If still blank, try a different cable or device.
What are the ceiling mount requirements?
Use a UL-listed ceiling mount rated for at least 25 lbs (11.3 kg). Ensure the mounting surface can support the weight. Follow the mounting kit instructions and use safety cable.
How do I enable the security lock?
Go to the security menu in the projector settings. Set a password and enable the security lock. The projector will require the password on startup. You can also use a Kensington lock.
What is the typical lamp life and where can I buy a replacement?
Lamp life is approximately 3000 hours in normal mode. Purchase genuine Panasonic lamp model ET-LAA410 from authorized dealers or online stores.
Can I use the projector for 3D content?
Yes, the PT-REZ12 supports 3D projection with compatible 3D glasses and source. Enable 3D mode in the menu and use an HDMI 1.4 cable.
How do I reset the projector to factory settings?
Press the MENU button, navigate to 'Setup', select 'Factory Defaults', and confirm. This will reset all settings except the lamp timer. You may need to re-enter security password.
User questions about PT-REZ12 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PT-REZ12 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PT-REZ12 by PANASONIC.
USER MANUAL PT-REZ12 PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : PT-REZ12
Category : Projector