WJ-NX510KG - VCR i-PRO - Free user manual and instructions
Find the device manual for free WJ-NX510KG i-PRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | i-PRO |
| Model | WJ-NX510KG |
| Video Compression | H.265, H.264, MJPEG |
| Recording Resolution | Up to 4K (3840x2160) |
| Recording Frame Rate | Up to 30 fps per channel at 4K |
| Storage Capacity | Supports up to 8 built-in HDDs (each up to 10 TB, total up to 80 TB) |
| Network Interface | 2 x 10/100/1000 Mbps Ethernet ports |
| Audio Support | Audio line-in and line-out, two-way audio |
| Alarm I/O | 16 alarm inputs, 4 alarm outputs |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | Approx. 120 W (without HDDs) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Dimensions (W x H x D) | 430 mm x 88 mm x 420 mm (16.9" x 3.5" x 16.5") |
| Weight | Approx. 8.5 kg (18.7 lbs) without HDDs |
| Mounting | Rackmount (19") or desktop |
| Supported Cameras | Up to 32 IP cameras (license included for 16) |
| Max Recording Rate | 400 Mbps total bandwidth |
| Remote Access | Via web browser, mobile app (iOS/Android), and i-PRO View Pro software |
| Warranty | 3 years standard warranty |
Frequently Asked Questions - WJ-NX510KG i-PRO
How do I install hard drives in the WJ-NX510KG?
Open the front panel, remove the HDD trays, mount the drives (3.5" SATA HDDs) using the provided screws, slide trays back into the bays, and secure them. Follow the Quick Start Guide for detailed steps.
Can I access the NVR remotely from my smartphone?
Yes, download the i-PRO View Pro app from the App Store or Google Play. After setting up port forwarding on your router, you can view live feeds and playback recordings remotely.
How many cameras does this NVR support?
The WJ-NX510KG supports up to 32 IP cameras. It comes with licenses for 16 cameras; additional licenses can be purchased for the remaining 16.
What should I do if the NVR does not detect my camera?
Check that the camera is powered and connected to the same network. Use the automatic discovery tool in the NVR's web interface. If still not detected, try manually adding the camera by IP address.
How do I perform a factory reset?
Press and hold the reset button (located on the rear panel) for 10 seconds using a paperclip. The NVR will reboot with factory default settings. Note that all recordings and configurations will be erased.
Is it possible to back up recordings to an external device?
Yes, you can export recordings to a USB drive connected to the NVR's USB ports. Use the backup function in the playback interface to select the desired time range and cameras.
What is the maximum storage capacity?
The NVR supports up to 8 SATA HDDs, each up to 10 TB, for a total maximum of 80 TB. We recommend using enterprise-grade drives for 24/7 operation.
Can I view the NVR on a monitor without a computer?
Yes, the NVR has HDMI and VGA outputs for direct connection to a monitor. You can use a mouse to navigate the on-screen interface for live view and playback.
How often should I clean the NVR?
Periodically dust the exterior and vents with a dry cloth. Ensure the fans are not blocked. For internal cleaning, consult a professional; avoid using liquids.
What network speed is required for smooth remote viewing?
A minimum upload speed of 10 Mbps is recommended for remote viewing of one 4K stream. For multiple streams, higher bandwidth is needed. Enable bandwidth control in the NVR settings.
User questions about WJ-NX510KG i-PRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your VCR in PDF format for free! Find your manual WJ-NX510KG - i-PRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WJ-NX510KG by i-PRO.