BTH-900-MAX - Uncategorized Pryme - Free user manual and instructions
Find the device manual for free BTH-900-MAX Pryme in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bluetooth Headset |
| Brand | Pryme |
| Model | BTH-900-MAX |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 meters (33 feet) |
| Battery Type | Rechargeable Lithium-ion |
| Battery Capacity | 200 mAh |
| Charging Time | Approximately 2 hours |
| Playback Time | Up to 10 hours |
| Standby Time | Up to 150 hours |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Microphone | Built-in, noise-canceling |
| Controls | Volume, Play/Pause, Call, Power |
| Weight | 180 grams (6.3 oz) |
| Dimensions (L x W x H) | 17.5 x 15.5 x 7.5 cm |
| Package Contents | Headset, USB charging cable, User manual |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety Warning | Do not expose to extreme temperatures or moisture. |
| Spare Parts Availability | Contact Pryme support for replacement earpads and cables. |
Frequently Asked Questions - BTH-900-MAX Pryme
How do I pair the Pryme BTH-900-MAX with my phone?
Turn on the headset by holding the power button for 3 seconds until the LED flashes blue and red. Enable Bluetooth on your phone and select 'BTH-900-MAX' from the available devices. If prompted, enter PIN 0000.
How long does the battery last?
The BTH-900-MAX offers up to 10 hours of continuous playback on a full charge. Standby time can reach up to 150 hours.
Can I use the headset while charging?
Yes, you can use the headset while it is charging via the included USB cable. However, charging may take slightly longer if in use.
How do I reset the headset?
If the headset is unresponsive, press and hold the power button for 10 seconds until the LED turns off. Then turn it on again normally.
Is the microphone noise-canceling?
Yes, the built-in microphone features noise-canceling technology to reduce background noise during calls.
What should I do if the headset won't connect?
Make sure the headset is in pairing mode (flashing blue/red). Go to your phone's Bluetooth settings, forget the device if previously paired, and try again. Also ensure the headset is charged.
How do I adjust the volume?
Use the volume controls on the earcup. Press the '+' button to increase volume and the '-' button to decrease. A beep indicates maximum or minimum volume.
Can I connect to multiple devices?
The headset supports multi-point connection, allowing you to connect to two devices simultaneously (e.g., phone and tablet). Playback from the last active device will take priority.
How do I clean the headset?
Clean the headset with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. For the earpads, gently wipe them; avoid soaking.
Where can I find replacement earpads?
Replacement earpads can be ordered by contacting Pryme customer support or visiting the official website. Please have your model number (BTH-900-MAX) ready.
User questions about BTH-900-MAX Pryme
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BTH-900-MAX - Pryme and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTH-900-MAX by Pryme.
USER MANUAL BTH-900-MAX Pryme
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pryme
Model : BTH-900-MAX
Category : Uncategorized