OIP-N40E - Uncategorized Lumens - Free user manual and instructions
Find the device manual for free OIP-N40E Lumens in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Network Camera |
| Brand | Lumens |
| Model | OIP-N40E |
| Image Sensor | 1/2.8-inch Progressive Scan CMOS |
| Resolution | 1920 x 1080 (Full HD) at 30 fps |
| Network Interface | 10/100Base-T Ethernet with PoE (802.3af) |
| Compression | H.265, H.264, MJPEG |
| Lens | 2.8mm fixed lens, F2.0 |
| Angle of View | Horizontal: 103°, Vertical: 58° |
| Dimensions (with bracket) | 120 mm x 80 mm x 60 mm |
| Weight | Approx. 320 g |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | Max 5.5W |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C |
| Indoor/Outdoor | Indoor use only |
| Protection Rating | Not specified (typically indoor) |
| Main Features | Motion detection, two-way audio, IR night vision up to 10m, microSD card slot (up to 128GB) |
| Video Output | RTSP, ONVIF Profile S, HTTP live streaming |
| Audio | Built-in microphone and speaker, audio line in/out |
| Cleaning and Maintenance | Clean lens with soft dry cloth. Avoid solvents. Keep ventilation holes clear. |
| Safety Precautions | Use only approved PoE injector/switch. Do not expose to rain or moisture. |
| Spare Parts | Mounting bracket, power adapter (if using DC), screws. Contact Lumens support. |
| Warranty | Standard 2 years from date of purchase |
Frequently Asked Questions - OIP-N40E Lumens
How do I set up the camera for the first time?
Connect the camera to your network via PoE or DC power. Use the Lumens IP Finder software to discover the camera on your network. Access the camera's web interface by entering its IP address in a browser. Default credentials are admin/admin.
Can I use the camera outdoors?
The OIP-N40E is designed for indoor use only. It does not have an IP rating for water or dust protection. If outdoor installation is required, place it under a roof or use an outdoor housing.
How to reset the camera to factory settings?
Press and hold the reset button on the back of the camera for 10 seconds using a paperclip. The camera will reboot and restore default settings. The default IP is 192.168.0.100.
Does the camera support PoE?
Yes, the camera supports Power over Ethernet (PoE) IEEE 802.3af. Use a PoE switch or injector to power the camera and transmit data over a single Ethernet cable.
How can I view the camera remotely?
Enable UPnP or port forwarding on your router to access the camera from the internet. Or use the Lumens Cloud Service for easy remote access without complex setup. The camera also supports RTSP for third-party software.
What storage options are available?
The camera has a microSD card slot (up to 128GB). It also supports NAS (Network Attached Storage) via SMB/CIFS, and continuous recording via FTP or RTSP streaming.
How to enable motion detection?
Log into the camera's web interface, go to Event > Motion Detection. Draw detection zones on the image. Set sensitivity and schedule. When motion is detected, the camera can send email alerts, record to SD card, or trigger FTP upload.
The video feed is blurry or out of focus. What should I do?
First, clean the lens with a soft cloth. Ensure the camera is not too close to the object. The lens is fixed focus, so you cannot adjust focus manually. If still blurry, check if the protective film is removed or contact support.
Does the camera work with third-party VMS software?
Yes, the camera is ONVIF Profile S compliant and supports RTSP stream. It works with most VMS software such as Blue Iris, Milestone, and Synology Surveillance Station.
How to update the camera firmware?
Download the latest firmware from the Lumens support website. In the camera's web interface, go to Maintenance > Firmware Upgrade. Select the firmware file and click Upgrade. Do not power off during upgrade.
User questions about OIP-N40E Lumens
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual OIP-N40E - Lumens and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OIP-N40E by Lumens.
USER MANUAL OIP-N40E Lumens
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lumens
Model : OIP-N40E
Category : Uncategorized