Pixie Strip 120 - Lighting American DJ - Free user manual and instructions
Find the device manual for free Pixie Strip 120 American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Strip Light Fixture |
| Model | Pixie Strip 120 |
| Manufacturer | American DJ |
| LED Quantity | 120 SMD 5050 LEDs |
| LED Colors | RGB (Red, Green, Blue) |
| Beam Angle | 120 degrees |
| Dimensions (L x W x H) | 1000 x 50 x 50 mm (39.4 x 2.0 x 2.0 in) |
| Weight | 2.5 kg (5.5 lbs) |
| Power Consumption | 120W maximum |
| Power Supply | AC 100-240V, 50/60Hz |
| Control Modes | DMX (3/7/11 channels), Master/Slave, Sound Active, Auto Run |
| DMX Connectors | 3-pin XLR (In/Out) |
| Built-in Programs | Multiple color chase and fade effects |
| Housing Material | Aluminum extrusion with polycarbonate lens |
| Mounting Options | Floor standing, truss mounting via bracket |
| Cooling | Passive convection |
| IP Rating | IP20 (indoor use only) |
| Safety Certifications | CE, RoHS |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Repairability & Spare Parts | LEDs are non-replaceable; power supply and control board replaceable by qualified technician. |
Frequently Asked Questions - Pixie Strip 120 American DJ
How do I set the DMX address on the Pixie Strip 120?
Use the menu buttons on the rear panel: press Menu to enter settings, select DMX Address, then use Up/Down to set the desired starting address (1-512). Press Enter to confirm.
Can I use this fixture without a DMX controller?
Yes, the Pixie Strip 120 has Sound Active and Auto Run modes. To enable them, press the Mode button until the desired mode appears. In Sound Active, it responds to music via the built-in microphone.
How many DMX channels does the fixture use?
It supports three DMX channel modes: 3-channel (RGB), 7-channel (RGB, dimmer, strobe, color macro, effects), and 11-channel (individual pixel control). Select the mode in the DMX Channel menu.
Can I daisy-chain multiple Pixie Strip 120 fixtures?
Yes, use the DMX In and DMX Out connectors to link up to 32 units. Ensure each fixture has a unique DMX address. For longer runs, use a DMX terminator on the last unit.
What power supply do I need?
The fixture includes an internal power supply that accepts AC 100-240V, 50/60Hz. No external power supply is needed. Connect directly to a standard wall outlet.
Can I mount the Pixie Strip 120 vertically?
Yes, the fixture can be mounted in any orientation. Use the included mounting brackets to secure it to a truss or wall. Ensure the vents are not obstructed for proper cooling.
Why is the fixture not responding to sound?
Check that the Sound Active mode is selected. Adjust the sensitivity using the menu (Sound Sensitivity). Also ensure the built-in microphone is not covered. High background noise may affect performance.
How do I reset the fixture to factory defaults?
Press and hold the Menu button for 5 seconds until the display shows 'Reset'. Press Enter to confirm. All settings will be restored to default.
Can I control individual LEDs?
In the 11-channel DMX mode, you can control each of the 120 LEDs individually (or in groups) depending on the pixel mapping. The fixture uses 10 zones, each with RGB control (30 channels) plus overall dimmer, strobe, etc.
What maintenance does the Pixie Strip 120 require?
Regularly clean the lens with a soft, dry cloth to remove dust. Check cables and connectors for damage. No internal cleaning is required. LEDs are non-serviceable.
User questions about Pixie Strip 120 American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Pixie Strip 120 - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pixie Strip 120 by American DJ.