GO link Max - Uncategorized iFi Audio - Free user manual and instructions
Find the device manual for free GO link Max iFi Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable USB DAC/Amp |
| Brand | iFi Audio |
| Model | GO link Max |
| Connectivity | USB-C input, 3.5mm & 4.4mm headphone outputs |
| DAC Chip | ES9219MQ (dual) |
| Output Power | Up to 165mW into 32Ω |
| Headphone Impedance | 16Ω – 300Ω |
| Frequency Response | 20Hz – 20kHz (±0.5dB) |
| THD+N | <0.005% |
| Signal-to-Noise Ratio | >120dB |
| Dimensions | Approx. 50 x 20 x 12 mm |
| Weight | Approx. 18g |
| Power Input | USB bus-powered (5V/500mA) |
| Supported Formats | PCM up to 32-bit/384kHz, DSD up to DSD256, MQA |
| Controls | Volume buttons, LED indicator |
| LED Indicator | Sample rate indicator (multiple colors) |
| Cable Length | USB-C cable: approx. 50cm (built-in) |
| Material | Aluminum chassis, braided cable |
| Compatibility | Windows, macOS, iOS, Android |
| Color | Black / Space Gray |
Frequently Asked Questions - GO link Max iFi Audio
What devices are compatible with the iFi GO link Max?
The GO link Max works with any device that supports USB audio, including Windows, macOS, iOS (iPhone/iPad via Lightning to USB-C adapter), and Android phones with USB-C.
Does the GO link Max support high-resolution audio?
Yes, it supports PCM up to 32-bit/384kHz, DSD up to DSD256, and MQA rendering for Tidal Masters.
Can I use headphones with a 4.4mm balanced cable?
Yes, the GO link Max has a 4.4mm balanced output in addition to the 3.5mm single-ended output, allowing you to use balanced headphones.
How much power does the GO link Max provide?
It can deliver up to 165mW into 32 ohms, enough to drive most portable headphones and IEMs to high volumes.
Is the GO link Max compatible with gaming consoles?
It can be used with the Nintendo Switch (USB-C) and PS5/Xbox (via USB port), but may require a USB adapter for some consoles.
How do I clean the GO link Max?
Use a soft, dry cloth to wipe the metal chassis. Avoid using liquids or abrasive cleaners. Keep the USB-C port and headphone jacks free of dust.
Does the LED color indicate anything?
Yes, the LED glows different colors to indicate the sample rate: green for 44.1/48kHz, yellow for 88.2/96kHz, cyan for 176.4/192kHz, blue for 352.8/384kHz, magenta for DSD, and white for MQA.
Can I use the GO link Max while charging my phone?
It does not support pass-through charging; it draws power from the device’s USB port. For phones, use a Y-cable if you need simultaneous charging.
What is the cable length?
The built-in USB-C cable is approximately 50cm (20 inches) long, suitable for use with phones and laptops.
Is the GO link Max repairable?
The device is not user-serviceable. If damaged, contact iFi Audio support for warranty or repair options. Do not attempt to open the case.
User questions about GO link Max iFi Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GO link Max - iFi Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GO link Max by iFi Audio.
USER MANUAL GO link Max iFi Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : iFi Audio
Model : GO link Max
Category : Uncategorized