Xpression 2000W - Lighting Showtec - Free user manual and instructions
Find the device manual for free Xpression 2000W Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Lighting Fixture (Follow Spot / Wash Light) |
| Brand | Showtec |
| Model | Xpression 2000W |
| Power Consumption | 2000 W |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions (L x W x H) | 600 x 400 x 300 mm |
| Weight | 25 kg |
| Light Source | HMI 2000W Discharge Lamp |
| Color Temperature | 6000 K |
| Luminous Flux | Approx. 200,000 lm |
| Beam Angle | 15° - 40° (manual zoom) |
| Control | DMX-512 (3 channels) |
| Features | Manual focus, dimmer, shutter, color wheel with 6 colors + white |
| Cooling | Forced air (fan) |
| Safety | Use with proper ventilation; replace lamp when cool; disconnect power before service |
| Maintenance | Clean lens with soft cloth; replace lamp after 500 hours; check fan regularly |
| Spare Parts | Lamp (OSRAM HMI 2000W), fuse (10A 250V), power cable |
| Accessories Included | Mounting bracket, safety cable, power cable, manual |
| Intended Use | Stage, theater, concert, and event lighting |
Frequently Asked Questions - Xpression 2000W Showtec
How do I replace the lamp in the Showtec Xpression 2000W?
Turn off the fixture and let the lamp cool for at least 15 minutes. Disconnect power, open the lamp access door, and remove the old lamp by releasing the spring clips. Insert the new lamp (OSRAM HMI 2000W) without touching the glass, secure the clips, close the door, and reconnect power. Reset the lamp timer if applicable.
What is the recommended DMX start address for the Xpression 2000W?
The default DMX start address is 1. Use the control panel to set a different address between 1 and 512. The fixture uses 3 DMX channels (dimmer, color wheel, shutter). Ensure no overlapping addresses in your DMX chain.
Can I use a dimmer pack with this fixture?
No, the Showtec Xpression 2000W requires a direct mains connection. Using an external dimmer pack may damage the fixture's internal ballast. Always plug it into a switched outlet rated for at least 10A.
How do I clean the lens and reflector?
Wait until the fixture is cool and disconnected. Use a lint-free cloth slightly dampened with glass cleaner. Wipe the lens gently. For the reflector, use a soft brush or compressed air to remove dust. Avoid touching the reflector surface.
What should I do if the fixture does not power on?
Check that the power cable is securely connected and the outlet has power. Inspect the fuse (10A 250V) inside the power entry module and replace if blown. If the issue persists, contact Showtec support.
Is the Xpression 2000W compatible with LED lamps?
No, this fixture is designed exclusively for HMI 2000W discharge lamps. Attempting to install an LED lamp will cause malfunction and may create a fire hazard.
What is the maximum ambient temperature for operation?
The fixture is rated for use in ambient temperatures up to 40°C (104°F). Ensure adequate airflow around the fixture and do not cover ventilation slots.
How do I reset the lamp hour counter?
Access the menu via the control panel, navigate to 'Lamp Hours' or 'Service,' then select 'Reset.' Confirm the action. This should be done after each lamp replacement.
Can I mount the fixture upside down?
Yes, the Xpression 2000W can be mounted in any orientation using the included mounting bracket. Always use a safety cable rated for at least 10 times the fixture's weight.
Why is the fixture overheating?
Check that the fan is spinning and not blocked. Clean any dust from the fan and ventilation grilles. Ensure the ambient temperature is below 40°C and that the fixture is not placed near heat sources. If problem persists, the thermal sensor may need replacement.
User questions about Xpression 2000W Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Xpression 2000W - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xpression 2000W by Showtec.
USER MANUAL Xpression 2000W Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : Xpression 2000W
Category : Lighting