Sprinter 130SI - Welding machine LINCOLN ELECTRIC - Free user manual and instructions
Find the device manual for free Sprinter 130SI LINCOLN ELECTRIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Welding Machine |
| Brand | Lincoln Electric |
| Model | Sprinter 130SI |
| Welding Processes | MIG, Flux-Cored, Stick (MMA) |
| Input Voltage | 230 V, Single Phase |
| Input Frequency | 50/60 Hz |
| Output Current Range | 30 - 130 A |
| Duty Cycle | 20% at 130 A |
| Weight | 21 kg (46.3 lbs) |
| Dimensions (L x W x H) | 430 x 250 x 380 mm |
| Protection Class | IP21 |
| Insulation Class | F |
| Wire Feed Speed | 1.5 - 15 m/min |
| Wire Diameter (MIG) | 0.6 - 0.8 mm |
| Electrode Diameter (MMA) | 1.6 - 2.5 mm |
| Cooling System | Forced Air Cooling |
| Maintenance | Clean vents regularly; check cables for wear |
| Safety Features | Overload protection, thermal cutout, fan delay |
| Spare Parts Availability | Contact Lincoln Electric distributor for genuine parts |
| Included Accessories | MIG gun, work clamp, gas hose, regulator (optional), primary cable |
Frequently Asked Questions - Sprinter 130SI LINCOLN ELECTRIC
What welding processes can the Sprinter 130SI perform?
The Sprinter 130SI supports MIG (GMAW), flux-cored (FCAW), and stick (MMA) welding processes.
What is the maximum welding current and duty cycle?
It provides a maximum output of 130 A with a 20% duty cycle. For continuous welding, reduce the current accordingly.
What power supply is required?
It operates on 230 V single-phase power at 50/60 Hz.
What wire diameters are compatible?
For MIG welding, use 0.6 mm or 0.8 mm solid or flux-cored wires.
How do I set the wire feed speed?
Adjust the wire feed speed control knob on the front panel. It ranges from 1.5 to 15 m/min.
What safety precautions should I take?
Always wear appropriate PPE (welding helmet, gloves, protective clothing). Ensure proper ventilation and avoid welding on flammable surfaces. Use the thermal overload protection feature as a safety cutout.
How do I clean and maintain the machine?
Regularly clean the air vents with compressed air to prevent dust buildup. Inspect cables and the MIG gun for damage before each use.
What is the weight and size of the unit?
The Sprinter 130SI weighs 21 kg and has dimensions of 430 x 250 x 380 mm (L x W x H).
Can I use it for auto body repair?
Yes, its 30-130 A output range makes it suitable for thin sheet metal welding commonly found in automotive repair.
Where can I find spare parts?
Spare parts are available through Lincoln Electric authorized distributors. Refer to the manual for part numbers.
User questions about Sprinter 130SI LINCOLN ELECTRIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual Sprinter 130SI - LINCOLN ELECTRIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sprinter 130SI by LINCOLN ELECTRIC.
USER MANUAL Sprinter 130SI LINCOLN ELECTRIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LINCOLN ELECTRIC
Model : Sprinter 130SI
Category : Welding machine