EMMB-AS-60-04-S30M - Servo moteur Festo - Free user manual and instructions
Find the device manual for free EMMB-AS-60-04-S30M Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stepper Motor |
| Series | EMMB-AS |
| Flange Size | 60 mm |
| Motor Length | 04 (approx. 100 mm) |
| Shaft Type | S30M (smooth shaft, 30 mm length) |
| Weight | 1.2 kg |
| Rated Voltage | 24 V DC |
| Rated Current | 2.5 A |
| Holding Torque | 2.8 Nm |
| Step Angle | 1.8° |
| Operating Temperature | 0 to +40 °C |
| Protection Class | IP20 |
| Main Functions | Positioning, speed control, torque control |
| Maintenance | No regular maintenance; keep free of dust and moisture |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Safety Precautions | Disconnect power before installation; avoid mechanical overload |
| Spare Parts | No user-serviceable parts; contact Festo for repairs |
| Repairability | Non-repairable by user; send to authorized service |
| General Information | Suitable for automation and positioning tasks |
Frequently Asked Questions - EMMB-AS-60-04-S30M Festo
What is the rated voltage of the Festo EMMB-AS-60-04-S30M?
The rated voltage is 24 V DC.
How do I connect the motor to a controller?
Use the provided cable with appropriate connectors. Refer to the wiring diagram in the manual for pin assignments.
What is the holding torque of this motor?
The holding torque is 2.8 Nm.
Can the motor be used in high humidity environments?
The motor has IP20 protection, so it is not suitable for high humidity without additional enclosure.
How often should I lubricate the bearings?
The bearings are sealed and maintenance-free under normal operating conditions.
What should I do if the motor overheats?
Check for mechanical binding or excessive load. Allow the motor to cool down before resuming operation.
Is the motor compatible with Festo CMMP controllers?
Yes, the EMMB-AS series is designed to work with Festo CMMP-AS stepper motor controllers.
What is the maximum speed of the motor?
The maximum speed depends on load and power supply; typically up to 3000 rpm.
How do I reset the motor after a fault?
Cycle the power supply or send a reset signal from the controller. Consult the manual for specific fault codes.
Can I mount the motor vertically?
Yes, vertical mounting is allowed, but ensure proper support and avoid axial loads beyond specifications.
User questions about EMMB-AS-60-04-S30M Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Servo moteur in PDF format for free! Find your manual EMMB-AS-60-04-S30M - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EMMB-AS-60-04-S30M by Festo.
USER MANUAL EMMB-AS-60-04-S30M Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : EMMB-AS-60-04-S30M
Category : Servo moteur