LSE-3 - Uncategorized Deye - Free user manual and instructions
Find the device manual for free LSE-3 Deye in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Hybrid Inverter |
| Dimensions (L x W x H) | 500 x 400 x 200 mm |
| Weight | 25 kg |
| Input Voltage (DC) | 48 V |
| Output Voltage (AC) | 230 V |
| Rated Power | 3000 W |
| MPPT Range | 60-115 VDC |
| Maximum Efficiency | 97% |
| Battery Type | Lead-acid or Lithium |
| Protection Class | IP65 |
| Operating Temperature | -25°C to +60°C |
| Display | LCD with touch buttons |
| Warranty | 5 years |
| Cooling Type | Fan cooling |
| Communication Ports | RS485, CAN, USB |
| Functions | Grid-tie, off-grid, battery backup, MPPT |
| Maintenance | Clean air vents, tighten connections monthly |
| Safety Features | Overload, short-circuit, over-temperature, anti-islanding |
| Spare Parts | Fan, capacitors, display board |
| Repairability | Modular design, user-replaceable fans |
| Certifications | CE, TUV, VDE |
Frequently Asked Questions - LSE-3 Deye
What is the maximum PV input power for LSE-3?
The maximum PV input power is 4500W, with a voltage range of 60-115 VDC. Ensure the total panel wattage does not exceed this limit.
Can LSE-3 work without batteries?
Yes, LSE-3 can operate in grid-tie mode without batteries, but battery backup is required for off-grid operation. Refer to the manual for wiring details.
What is the recommended battery voltage?
The recommended battery voltage is 48V DC. It supports both lead-acid and lithium batteries. Ensure the battery capacity meets your load requirements.
How to reset the LSE-3 inverter?
Press and hold the power button for 10 seconds until the device shuts down, then release and press again to turn on. This resets the inverter without losing settings.
Is LSE-3 suitable for outdoor installation?
Yes, with an IP65 rating, it is dust-tight and protected against water jets, making it suitable for outdoor installation under a roof or shelter.
What communication port can I use for monitoring?
Use the RS485 port for remote monitoring via a third-party data logger, or connect via USB to a PC for local configuration. CAN port is for battery communication.
How often should I clean the cooling fans?
Clean the fans every 3 months or more frequently in dusty environments. Use a soft brush or compressed air to remove debris.
Can I parallel multiple LSE-3 inverters?
Yes, up to 6 units can be paralleled for higher power. Each unit must have the same firmware version and be connected via parallel communication cables.
What type of warranty does Deye provide?
Deye offers a standard 5-year warranty for LSE-3. Extended warranties are available through authorized dealers. Keep the purchase receipt for service.
Why does my inverter show 'Grid Fault' error?
'Grid Fault' indicates abnormal grid voltage or frequency. Check the grid supply; the inverter will resume automatically once conditions are within limits. If persistent, contact support.
User questions about LSE-3 Deye
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LSE-3 - Deye and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSE-3 by Deye.
USER MANUAL LSE-3 Deye
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Deye
Model : LSE-3
Category : Uncategorized