GS-6311-24PL4X - Uncategorized Planet - Free user manual and instructions
Find the device manual for free GS-6311-24PL4X Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch with 10G Uplinks |
| Model | GS-6311-24PL4X |
| Brand | Planet |
| Ports | 24 x 10/100/1000BASE-T PoE+ (max 30W per port) + 4 x 10GBASE-X SFP+ |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | 802.1Q VLAN up to 4K groups |
| Layer 3 Features | Static routing, RIP, OSPF |
| PoE Budget | 370W |
| Management | Web, CLI, SNMP v1/v2c/v3 |
| Dimensions (W x D x H) | 440 x 220 x 44 mm (19-inch rackmount) |
| Weight | 3.5 kg |
| Power Supply | AC 100-240V, 50/60Hz, internal |
| Power Consumption | Max 400W (with PoE) |
| Cooling | 2 x smart fans |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Safety Certifications | CE, FCC |
| Maintenance | Clean with dry cloth; avoid liquids |
| Spare Parts | Power supply unit, fan module |
| Repairability | User-replaceable fan and PSU |
Frequently Asked Questions - GS-6311-24PL4X Planet
How do I power on the Planet GS-6311-24PL4X switch?
Connect the power cord to the switch and plug it into a grounded AC outlet. The switch will boot automatically. Wait for the System LED to turn green.
How do I reset the switch to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The switch will reboot with factory settings.
What is the default IP address for management?
The default IP address is 192.168.1.1. You can access the web interface via http://192.168.1.1. Default credentials are admin/admin.
How do I configure VLANs on this switch?
Access the web interface, go to VLAN configuration. Create VLAN groups and assign ports accordingly. Use 802.1Q tagging for trunk ports.
Can I use PoE on all ports?
Yes, all 24 gigabit ports support PoE+ with a total budget of 370W. Each port can deliver up to 30W, but total power must not exceed the budget.
How do I update the firmware?
Download the latest firmware from Planet's website. Go to System > Firmware Upgrade in the web interface, upload the file, and follow prompts. Do not power off during upgrade.
What type of SFP+ module is supported?
The 4 SFP+ slots support 10GBASE-SR/LR and 10GBASE-CU direct attach cables. Use Planet-compatible modules for best performance.
How do I monitor network traffic?
Enable port mirroring via web interface or CLI. Select source and destination ports to capture traffic for analysis.
What should I do if the switch overheats?
Ensure proper ventilation around the switch. Check that fans are spinning. Clean air filters if present. Reduce PoE load if necessary.
How can I contact technical support?
Visit Planet's official website at www.planet.com.tw for support resources, or contact your local distributor for assistance.
User questions about GS-6311-24PL4X Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GS-6311-24PL4X - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-6311-24PL4X by Planet.
USER MANUAL GS-6311-24PL4X Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : GS-6311-24PL4X
Category : Uncategorized