25FB425W-L - Water dispenser Follett - Free user manual and instructions
Find the device manual for free 25FB425W-L Follett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Dispenser |
| Brand | Follett |
| Model | 25FB425W-L |
| Dimensions (H x W x D) | 42.6 x 16.3 x 15.7 inches |
| Weight | 52 lbs |
| Power Supply | 115 VAC, 60 Hz, 1.5 A |
| Water Capacity | 3.5 gallons |
| Water Temperature Range | Cold: 40-50°F / Hot: 185-195°F |
| Faucet Type | Two faucets (cold and hot) |
| Installation Type | Countertop or freestanding |
| Material | Stainless steel reservoir and exterior |
| Filtration | Built-in carbon filter (replaceable) |
| Safety Features | Child-safety lock on hot faucet, auto shut-off |
| Maintenance | Clean with mild soap; replace filter every 6 months |
| Certifications | NSF/ANSI 42, UL listed |
| Warranty | 1 year limited |
Frequently Asked Questions - 25FB425W-L Follett
How do I install the Follett 25FB425W-L water dispenser?
Place the dispenser on a level surface near a power outlet and water source. Connect the water line to the inlet (1/4-inch compression fitting). Plug into a grounded 115V outlet. Allow the reservoir to fill and heat/cool before use.
How often should I replace the water filter?
Replace the carbon filter every 6 months or when the flow rate decreases significantly. Use Follett replacement filter model F300-1.
Why is the hot water not working?
Check that the dispenser is plugged in and the hot water switch is on. If the reservoir is empty, wait for it to fill. The hot water tank may need to heat up (up to 20 minutes). If still not working, contact Follett support.
How do I clean the dispenser?
Unplug the unit. Wipe exterior with a damp cloth and mild detergent. For the interior, run a vinegar solution through the system (1 part vinegar to 3 parts water), then rinse with fresh water. Clean the drip tray regularly.
What is the maximum water pressure required?
The recommended water pressure is 30-80 psi. Use a pressure regulator if pressure exceeds 80 psi to avoid damage.
Can I use this dispenser with a water bottle instead of plumbed?
The 25FB425W-L is designed for direct plumbed installation only. For bottle-fed dispensers, consider other Follett models.
How do I adjust the hot water temperature?
The hot water temperature is preset but can be adjusted by a qualified technician. Do not attempt to modify the thermostat yourself.
What should I do if the dispenser is leaking?
Check all water line connections for tightness. Inspect the reservoir and drip tray for cracks. If leak persists, contact Follett service.
Is the dispenser energy efficient?
Yes, it uses insulated tanks and a low-power standby mode, reducing energy consumption by up to 40% compared to standard models.
How do I obtain the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about 25FB425W-L Follett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual 25FB425W-L - Follett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 25FB425W-L by Follett.
USER MANUAL 25FB425W-L Follett
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Follett
Model : 25FB425W-L
Category : Water dispenser