BrightEye 11-HD - Uncategorized Ensemble Designs - Free user manual and instructions
Find the device manual for free BrightEye 11-HD Ensemble Designs in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HD-SDI Distribution Amplifier |
| Model | BrightEye 11-HD |
| Brand | Ensemble Designs |
| Input | 1x HD-SDI (BNC) |
| Outputs | 11x HD-SDI (BNC) |
| Supported Standards | HD-SDI (SMPTE 292M), up to 3Gbps |
| Re-clocking | Automatic on each output |
| Dimensions | 1.72" H x 8.0" W x 6.5" D (4.4 x 20.3 x 16.5 cm) |
| Weight | 1.2 lbs (0.54 kg) |
| Power Supply | External AC adapter, 12V DC, 0.5A |
| Power Consumption | 6 W max |
| Mounting | Desktop or rackmount with optional kit |
| Indicators | Power and signal present LEDs |
| Cable Equalization | Up to 100m Belden 1694A |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Certifications | CE, FCC |
| Warranty | 2 years limited |
| Cleaning | Wipe with dry cloth; do not use liquids |
| Repairability | No user-serviceable parts; contact manufacturer |
Frequently Asked Questions - BrightEye 11-HD Ensemble Designs
What is the BrightEye 11-HD used for?
The BrightEye 11-HD is a 1x11 HD-SDI distribution amplifier designed to distribute a single HD video signal to 11 outputs with automatic re-clocking and cable equalization.
What video formats does it support?
It supports HD-SDI formats up to 3Gbps, including 1080i, 720p, and 1080p at various frame rates, per SMPTE 292M and 424M standards.
How do I connect the device?
Connect your video source to the INPUT BNC connector. Then connect up to 11 devices to the OUTPUT BNC connectors. Use high-quality 75-ohm coaxial cable (e.g., Belden 1694A).
Does it require a power supply?
Yes, use the included 12V DC external adapter. Plug it into the power jack and connect to a mains outlet. The Power LED will illuminate when powered.
Can I mount it in a rack?
The unit is designed for desktop use but can be rackmounted using the optional BrightEye Rack Mount Kit (sold separately).
What does the 'Signal Present' LED indicate?
The Signal Present LED lights up when a valid HD-SDI signal is detected at the input. If it is off, check cable connections and source output.
How far can I run cables from the amplifier?
With Belden 1694A cable, the input can be up to 100 meters (328 ft) before needing equalization. Outputs also maintain signal integrity over similar distances.
What should I do if there is no output?
First, verify the Power LED is on. Check that the input cable is secure and the source is active. Ensure all output cables are properly connected. If the issue persists, try power-cycling the unit.
Is the device hot-swappable?
Yes, the BrightEye 11-HD supports hot-swapping of video connections. However, always disconnect power before connecting or disconnecting the power adapter.
How do I clean the device?
Disconnect power and use a soft, dry cloth to wipe the exterior. Do not use any liquids, solvents, or abrasive cleaners. Avoid getting moisture into the connectors.
User questions about BrightEye 11-HD Ensemble Designs
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BrightEye 11-HD - Ensemble Designs and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BrightEye 11-HD by Ensemble Designs.
USER MANUAL BrightEye 11-HD Ensemble Designs
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ensemble Designs
Model : BrightEye 11-HD
Category : Uncategorized