651CPSSHPL3P - Uncategorized ServSense - Free user manual and instructions
Find the device manual for free 651CPSSHPL3P ServSense in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sensor/Controller Module |
| Model | 651CPSSHPL3P |
| Brand | ServSense |
| Dimensions (approx.) | 10 cm x 5 cm x 2 cm |
| Weight (approx.) | 100 g |
| Power Supply | 5V DC via USB or terminal block |
| Primary Functions | Sensor input, signal processing, output control |
| Communication Interface | I2C, SPI, UART |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -30°C to +70°C |
| Humidity Range | 0% to 90% non-condensing |
| Input Voltage Range | 4.5V - 5.5V DC |
| Current Consumption | 50 mA (typical) |
| Output Type | Digital (PWM), Analog (0-10V) |
| Protection Rating | IP54 (when properly enclosed) |
| Compliance | CE, RoHS |
| Mounting | DIN rail or screw mounting |
| Maintenance & Cleaning | Clean with a soft dry cloth. Do not use solvents. |
| Safety Instructions | Use only as per manual. Disconnect power before installation. |
| Spare Parts & Repairability | No user-serviceable parts. Contact ServSense for repairs. |
| Additional Information | Refer to user manual for detailed setup and calibration. |
Frequently Asked Questions - 651CPSSHPL3P ServSense
How do I power the ServSense 651CPSSHPL3P?
Connect a stable 5V DC power supply to the USB port or the VCC/GND terminal block. Ensure the supply can deliver at least 100 mA.
What is the default communication protocol?
The module supports I2C, SPI, and UART. The default is I2C (address 0x48).
How can I reset the device?
Press and hold the RESET button for 3 seconds. Alternatively, cycle power off and on.
What is the maximum sensor input voltage?
The analog input accepts 0-10V DC. Do not exceed 12V to avoid damage.
How do I update the firmware?
Download the latest firmware from ServSense website. Use the USB port and the provided flashing tool. Follow the detailed guide in the manual.
Can I use this module outdoors?
Yes, if installed in an IP54 or higher enclosure. The module itself is not waterproof.
What type of sensor can I connect?
Any analog sensor with 0-10V output, or digital sensors via I2C/SPI. Examples: temperature, pressure, light sensors.
How do I troubleshoot if no communication?
Check power (LED should be on), verify wiring, and ensure correct baud rate (e.g., 9600 for UART). Also check device address.
Is the device RoHS compliant?
Yes, the 651CPSSHPL3P is RoHS and CE certified.
Where can I find the full user manual?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translation.
User questions about 651CPSSHPL3P ServSense
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 651CPSSHPL3P - ServSense and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 651CPSSHPL3P by ServSense.
USER MANUAL 651CPSSHPL3P ServSense
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ServSense
Model : 651CPSSHPL3P
Category : Uncategorized