EKI-9502G - Access Point Advantech - Free user manual and instructions
Find the device manual for free EKI-9502G Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Wireless Access Point |
| Model | EKI-9502G |
| Brand | Advantech |
| Dimensions (W x D x H) | 135 x 105 x 30 mm |
| Weight | Approx. 0.5 kg |
| Power Supply | 12-48 VDC or PoE (IEEE 802.3af/at) |
| Power Consumption | Max 12 W |
| Wireless Standards | IEEE 802.11a/b/g/n/ac (2.4/5 GHz) |
| Max Data Rate | 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) |
| Ethernet Ports | 2 x RJ45 10/100/1000 Mbps |
| Antenna Connector | 2 x RP-SMA (external) |
| Operating Temperature | -40°C to 75°C |
| Mounting | DIN-rail or wall mount |
| Management | Web GUI, SNMP, CLI, Advantech Device Manager |
| Security | WPA2, WPA3, 802.1X, MAC filter, VPN passthrough |
| Ingress Protection | IP30 |
| Certifications | CE, FCC, UL |
| Maintenance | Keep clean; update firmware periodically |
| Repairability | No user-serviceable parts; contact support |
| Warranty | 5 years |
Frequently Asked Questions - EKI-9502G Advantech
How do I reset the EKI-9502G to factory defaults?
Press and hold the Reset button on the device for about 10 seconds until the status LED blinks. Release the button; the access point will reboot with factory settings.
What is the default IP address for web management?
The default IP address is 192.168.1.1. Ensure your computer is on the same subnet (e.g., 192.168.1.x) to access the web interface.
Can I power the device using PoE?
Yes, the EKI-9502G supports PoE (Power over Ethernet) compliant with IEEE 802.3af/at. Use a PoE switch or injector for convenient power delivery.
How do I configure the wireless network?
Log into the web interface, go to Wireless settings, and set the SSID, security mode (e.g., WPA2), and password. Apply changes and reboot if needed.
What is the maximum number of clients supported?
The EKI-9502G can support up to 128 concurrent wireless clients in typical operation, depending on traffic.
How do I update the firmware?
Download the latest firmware from Advantech's website. In the web interface, go to System > Firmware Upgrade, upload the file, and follow the on-screen instructions. Do not power off during upgrade.
Does the device support VLAN configuration?
Yes, the EKI-9502G supports 802.1Q VLAN tagging. You can assign VLAN IDs to SSIDs and Ethernet ports for network segmentation.
What should I do if the access point is not working?
Check power and Ethernet connections. Verify LED status: Power LED should be solid, Wireless LED should blink if active. Try a factory reset or consult the manual.
Can I mount the device outdoors?
The EKI-9502G has an IP30 rating, making it suitable for indoor or sheltered outdoor use. For harsh environments, use an additional enclosure.
What is the operating temperature range?
The device operates reliably from -40°C to 75°C, suitable for industrial environments.
User questions about EKI-9502G Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual EKI-9502G - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-9502G by Advantech.
USER MANUAL EKI-9502G Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-9502G
Category : Access Point