7603 - Uncategorized Haws - Free user manual and instructions
Find the device manual for free 7603 Haws in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Emergency Eyewash Station |
| Brand | Haws |
| Model | 7603 |
| Dimensions (H x W x D) | Approx. 18 x 14 x 10 inches (45 x 35 x 25 cm) |
| Weight | Approx. 12 lbs (5.4 kg) |
| Power Supply | None (gravity-fed or plumbed) |
| Water Flow Rate | 0.4 GPM (1.5 L/min) minimum per ANSI Z358.1 |
| Water Supply | Plumbed or portable tank (model dependent) |
| Primary Function | Provide emergency eye rinse for hazardous material exposure |
| Operation | Pull or push handle to activate; stays on until manually shut off |
| Standards Compliance | ANSI Z358.1, OSHA |
| Maintenance | Weekly activation test; annual inspection |
| Cleaning | Flush system with clean water; wipe exterior with mild soap |
| Dust Cover | Integrated flip-top or snap-on cover to protect nozzles |
| Spare Parts | Replacement nozzles, valves, and filters available |
| Repairability | Modular design; user-replaceable components |
| Warranty | Limited lifetime (typical for Haws products) |
| Installation | Wall-mount bracket included; plumber recommended |
| Material | ABS plastic body, stainless steel or brass valves |
| Temperature Range | 60-100°F (15-38°C) tepid water recommended |
| Accessories | Optional eyewash bottle, heater, alarm kit |
Frequently Asked Questions - 7603 Haws
How do I install the Haws 7603 eyewash station?
Mount the unit on a wall using the provided bracket at a height of 33-45 inches (84-114 cm) from the floor. Connect to a potable water supply according to local plumbing codes. For gravity-fed versions, fill tank with distilled water.
How often should I test the eyewash station?
Activate the unit weekly for at least 3 minutes to flush the system and ensure it operates. Also conduct an annual full inspection per ANSI Z358.1 standards.
What water temperature is recommended?
Tepid water between 60-100°F (15-38°C) is recommended to avoid injury. If using in cold environments, consider a heated supply line or a unit with a heater.
Can I use the eyewash station if it’s not connected to plumbing?
Yes, Haws offers gravity-fed models (like the 7603) with a built-in tank. Fill with clean water and pressurize according to the manual. These are ideal for areas without plumbed water.
What safety standards does the 7603 meet?
It complies with ANSI Z358.1-2014 and OSHA requirements for emergency eyewash equipment. It provides a minimum of 0.4 GPM (1.5 L/min) for 15 minutes.
How do I clean the eyewash station?
Flush the system with clean water weekly. To clean the exterior, use a mild detergent and soft cloth. Avoid abrasive cleaners. Disinfect the nozzles annually.
What should I do if the nozzles are clogged?
Remove the nozzle covers and soak them in distilled vinegar to dissolve mineral deposits. Rinse thoroughly. If the blockage persists, replace the nozzle assembly.
How long does the water flow after activation?
The unit will continue to flow until manually shut off. For plumbed models, there is no automatic timer. Gravity-fed models provide at least 15 minutes of flow.
Where can I buy replacement parts?
Authorized Haws distributors and online retailers sell spare parts like nozzles, valves, and filters. Use the model number 7603 to ensure compatibility.
How do I perform the annual inspection?
Check for leaks, corrosion, and proper flow rate. Verify the water is tepid. Inspect the dust covers and ensure they open freely. Record the inspection in a log.
User questions about 7603 Haws
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 7603 - Haws and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7603 by Haws.