A4SAP-E - Motherboard Supermicro - Free user manual and instructions
Find the device manual for free A4SAP-E Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Form Factor | Mini-ITX |
| Dimensions | 170 mm x 170 mm |
| Weight | 0.5 kg (approx.) |
| CPU Socket | LGA 1151 |
| Chipset | Intel C236 |
| Memory Type | DDR4 ECC |
| Number of Memory Slots | 2 |
| Maximum Memory Capacity | 64 GB |
| Expansion Slots | 1 x PCIe 3.0 x16 |
| Storage Interfaces | 4 x SATA3 |
| M.2 Slot | 1 x M.2 (PCIe 3.0 x4 & SATA) |
| Networking | 2 x Gigabit Ethernet (Intel i210) |
| USB Ports | 2 x USB 3.0, 2 x USB 2.0 |
| Video Output | 1 x VGA (via BMC) |
| Power Connector | 24-pin ATX + 4-pin CPU |
| Operating Temperature | 0°C to 40°C |
| BMC | Integrated IPMI 2.0 with dedicated LAN |
| Warranty | 1 year limited |
Frequently Asked Questions - A4SAP-E Supermicro
What type of processor is compatible with the Supermicro A4SAP-E motherboard?
The A4SAP-E supports Intel Xeon E3-1200 v5/v6 and 6th/7th Gen Core i3 processors with LGA 1151 socket. Ensure your CPU is compatible with the Intel C236 chipset.
Does this motherboard support ECC memory?
Yes, the A4SAP-E supports DDR4 ECC (Error Correcting Code) memory. It has two DIMM slots supporting up to 64 GB of unbuffered ECC memory.
How can I update the BIOS on the A4SAP-E?
You can update the BIOS using Supermicro's Flash Update Utility via a USB flash drive. Download the latest BIOS file from the Supermicro support page, rename it, and boot into the BIOS setup to use the M.2 Flash option.
What is the purpose of the BMC on this motherboard?
The Baseboard Management Controller (BMC) provides out-of-band management via IPMI 2.0. It allows remote monitoring, power control, and console redirection through a dedicated management LAN port.
Can I use standard ATX power supply with this board?
Yes, the motherboard requires a standard 24-pin ATX main power connector and an additional 4-pin CPU power connector. A standard ATX power supply will work.
How many drives can I connect?
The board has four SATA3 ports and one M.2 slot (supports both SATA and PCIe NVMe SSDs). You can connect up to four SATA HDDs/SSDs plus one M.2 drive.
Does it support NVMe?
Yes, the M.2 slot supports PCIe 3.0 x4 NVMe SSDs in addition to SATA M.2 drives. Check the BIOS settings to enable NVMe support.
What operating systems are compatible?
The motherboard supports Windows Server 2012/2016/2019, various Linux distributions (Ubuntu, CentOS, etc.), and VMware ESXi. Ensure you install the appropriate drivers.
How do I clear the CMOS?
To clear the CMOS, power off the system and remove the power cord. Locate the CMOS jumper (labeled JCMOS1) and short pins 2-3 for a few seconds, then return to pins 1-2. Alternatively, remove the coin battery for 10 seconds.
Can I install a dedicated GPU?
Yes, the single PCIe 3.0 x16 slot is fully compatible with most dedicated graphics cards. However, note that the board is Mini-ITX form factor, so choose a GPU that fits in your chassis.
User questions about A4SAP-E Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual A4SAP-E - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A4SAP-E by Supermicro.
USER MANUAL A4SAP-E Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : A4SAP-E
Category : Motherboard