OmniSwitch 6450 - Switch ALCATEL - Free user manual and instructions
Find the device manual for free OmniSwitch 6450 ALCATEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stackable Gigabit Ethernet Switch |
| Brand | Alcatel-Lucent |
| Model | OmniSwitch 6450 |
| Port Configuration | 24 x 10/100/1000BASE-T (or 48 x) + 4 x SFP+ uplinks |
| PoE Support | Optional PoE+ (IEEE 802.3at) on some models |
| Switching Capacity | 128 Gbps (for 24-port model) |
| Forwarding Rate | 95.2 Mpps (for 24-port model) |
| Layer 3 Features | Static routing, RIP, OSPF, VRRP |
| VLAN Support | 802.1Q VLANs, up to 4094 VLAN IDs |
| Dimensions (W x D x H) | 440 x 320 x 44 mm (1U) |
| Weight | 4.5 kg |
| Power Supply | 100-240V AC, 50-60 Hz, internal |
| Power Consumption | 80W (typical) |
| Cooling | Fan with variable speed |
| Operating Temperature | 0°C to 50°C |
| Management | CLI, Web GUI, SNMP, RMON |
| Stacking | Up to 8 units via stacking modules |
| Security Features | 802.1X, ACL, DHCP snooping, IP source guard |
| Maintenance | Clean with dry cloth; avoid liquids |
| Spare Parts & Repairability | Contact Alcatel-Lucent support for spare parts |
| General Information | Reliable enterprise switch for campus networks |
Frequently Asked Questions - OmniSwitch 6450 ALCATEL
How to reset the OmniSwitch 6450 to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the LEDs flash. The switch will reboot with factory settings.
What is the default IP address for management?
The default management IP is 192.168.1.1 with subnet mask 255.255.255.0. Use a console cable to access the CLI if needed.
How to enable PoE on the switch?
On PoE models, PoE is enabled by default. Use the command power inline auto on specific interfaces to activate it.
Can I stack multiple OmniSwitch 6450 units?
Yes, you can stack up to 8 units using the optional stacking modules and cables. The stack operates as a single switch.
How to configure VLANs?
Use the CLI command vlan
What is the maximum power consumption?
The typical power consumption is 80W. With PoE fully loaded, it can go up to 200W depending on model.
How to update the firmware?
Download the firmware file from Alcatel support, then use CLI command system flash download
Does the switch support link aggregation?
Yes, it supports IEEE 802.3ad LACP. Configure port channels by grouping interfaces and enabling LACP.
How to troubleshoot a port not working?
Check the cable connection, verify port status with show interfaces status, ensure VLAN configuration matches, and test with a known working device.
Where can I find the user manual?
The user manual is available for free download at notice-facile.com or Alcatel-Lucent support website in PDF format.
User questions about OmniSwitch 6450 ALCATEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual OmniSwitch 6450 - ALCATEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OmniSwitch 6450 by ALCATEL.
USER MANUAL OmniSwitch 6450 ALCATEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALCATEL
Model : OmniSwitch 6450
Category : Switch