M-990i Gen 2 - Camera Moultrie - Free user manual and instructions
Find the device manual for free M-990i Gen 2 Moultrie in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Trail Camera |
| Brand | Moultrie |
| Model | M-990i Gen 2 |
| Resolution | 20 MP |
| Video Resolution | 1080p HD |
| Trigger Speed | 0.5 seconds |
| Detection Range | 80 feet (24 meters) |
| Infrared LEDs | Low-glow, 940nm |
| Power Source | 8 AA batteries (not included) or external 6V DC |
| Battery Life | Up to 12 months on standby |
| Memory Card | SD/SDHC up to 32 GB (not included) |
| Dimensions (H x W x D) | 5.5 x 4.5 x 3.5 inches (14 x 11.4 x 8.9 cm) |
| Weight | 1.5 lbs (680 g) including batteries |
| Operating Temperature | -20°F to 120°F (-29°C to 49°C) |
| Time Lapse Mode | Yes, programmable intervals |
| Burst Mode | Up to 9 images per trigger |
| Security | Password protection, lockable strap |
| Maintenance | Clean lens with soft cloth, check battery contacts |
| Spare Parts Availability | Battery tray, mounting strap, power adapter |
| Warranty | 2 years limited |
Frequently Asked Questions - M-990i Gen 2 Moultrie
How do I insert batteries into the Moultrie M-990i Gen 2?
Open the battery compartment located on the bottom of the camera. Insert 8 AA batteries following the polarity markings inside. Replace the cover securely.
What type of memory card is compatible?
The camera supports SD and SDHC cards up to 32 GB. Format the card in the camera before first use for optimal performance.
How do I set up the time lapse mode?
In the menu, select 'Time Lapse' and choose the interval (e.g., 1 minute, 5 minutes). The camera will automatically capture images at that interval during the set time period.
What is the trigger speed of the M-990i Gen 2?
The trigger speed is approximately 0.5 seconds, allowing it to capture fast-moving wildlife with minimal delay.
How can I extend battery life?
Use lithium AA batteries for colder temperatures and longer life. Reduce the number of images per trigger and disable night video if not needed.
The camera is not taking any photos. What should I check?
Ensure the memory card is inserted and has free space. Verify batteries have power and are installed correctly. Also check that the power switch is ON and the mode is set to 'Photo' or 'Video'.
How do I protect the camera from theft?
Use the included mounting strap with a security cable lock. You can also enable the password protection in the setup menu to prevent unauthorized access.
What is the detection range of this camera?
The detection range is up to 80 feet (24 meters) in optimal conditions, with a 50-degree detection zone.
Can I use external power?
Yes, the camera has a 6V DC input jack for an external power source (sold separately). This can be used to extend continuous operation.
How do I reset the camera to factory settings?
In the menu, navigate to 'Settings' and select 'Reset'. Confirm the reset. Alternatively, remove the batteries and memory card for 5 minutes to reset.
User questions about M-990i Gen 2 Moultrie
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual M-990i Gen 2 - Moultrie and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M-990i Gen 2 by Moultrie.
USER MANUAL M-990i Gen 2 Moultrie
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moultrie
Model : M-990i Gen 2
Category : Camera