Flexstrip Set RGB - Lighting Showtec - Free user manual and instructions
Find the device manual for free Flexstrip Set RGB Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Strip Light Set |
| Brand | Showtec |
| Model | Flexstrip Set RGB |
| Length | 5 m (16.4 ft) |
| LED Count | 300 LEDs (60 LEDs/m) |
| Color | RGB (Red, Green, Blue) |
| Input Voltage | 12V DC |
| Power Consumption | 36W (max) |
| Beam Angle | 120° |
| IP Rating | IP20 (indoor use only) |
| Operating Temperature | -20°C to 45°C (-4°F to 113°F) |
| Life Expectancy | 50,000 hours |
| Dimming | Yes (via included controller) |
| Control Method | IR remote and manual buttons |
| Material | Flexible PCB with silicone coating |
| Weight (set) | 0.5 kg (1.1 lbs) |
| Controller Dimensions | 85 x 45 x 25 mm (3.3 x 1.8 x 1 in) |
| Safety Certifications | CE, RoHS |
| Maintenance | Wipe with a dry cloth; avoid liquids |
| Spare Parts | Power supply, controller, connectors available separately |
Frequently Asked Questions - Flexstrip Set RGB Showtec
How do I install the Showtec Flexstrip Set RGB?
Clean and dry the mounting surface. Peel off the adhesive backing and press the strip firmly. Connect the strip to the controller and power supply. Ensure the voltage matches (12V DC).
Can I cut the strip to a custom length?
Yes, you can cut the strip at the marked cut lines (every 3 LEDs). Use sharp scissors and ensure the cut is clean. The cut end can be reconnected using optional connectors.
What power supply is required?
A 12V DC power supply with at least 3A (36W) is recommended. Use the included adapter or a compatible third-party unit with the correct polarity.
Is the Flexstrip Set RGB waterproof?
No, this set has an IP20 rating, meaning it is not waterproof. It is designed for indoor use only, away from moisture and dust.
How do I control the colors and effects?
Use the included IR remote or the buttons on the controller. You can select static colors, brightness levels, and dynamic modes like fade, strobe, and flash.
Can I connect multiple Flexstrip sets together?
Yes, you can daisy-chain up to 2 sets (10m total) using the provided connectors and a higher amp power supply. Ensure not to exceed the total power rating.
How do I clean the strip light?
Disconnect power before cleaning. Gently wipe the strip with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners as they may damage the silicone coating.
Does the strip come with adhesive backing?
Yes, the strip has a pre-applied 3M adhesive tape on the back. For best adhesion, apply to a smooth, clean, and dry surface. Use mounting clips for extra support on uneven surfaces.
What is the warranty period?
Showtec offers a standard 2-year warranty from the date of purchase. It covers manufacturing defects but not damage from misuse, water, or improper installation.
The strip does not light up. What should I check?
Verify the power supply is plugged in and delivering 12V. Check all connections between strip, controller, and power supply. Ensure the remote has fresh batteries and is pointed at the sensor. If issues persist, test with a known working power supply.
User questions about Flexstrip Set RGB Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Flexstrip Set RGB - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flexstrip Set RGB by Showtec.
USER MANUAL Flexstrip Set RGB Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : Flexstrip Set RGB
Category : Lighting