INFINITY

TCYC-7 Cyclorama - Lighting INFINITY - Free user manual and instructions

Find the device manual for free TCYC-7 Cyclorama INFINITY in PDF.

📄 52 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice INFINITY TCYC-7 Cyclorama - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Cyclorama Light
Brand Infinity
Model TCYC-7 Cyclorama
Light Source High-power RGBW LEDs
Beam Angle 120°
Power Consumption 200W
Input Voltage AC 100-240V, 50/60Hz
DMX Channels 4/8 channel modes
Control Protocols DMX512
Display LED digital display with menu buttons
Housing Material Aluminum alloy
Dimensions (L x W x H) 25 x 25 x 35 cm
Weight 4.5 kg
Cooling System Active fan cooling
Operating Temperature -10°C to 40°C
IP Rating IP20 (indoor use only)
Mounting Options Floor stand or hanging bracket
Color Mixing RGBW color mixing with smooth transitions
Dimming 0-100% linear dimming
Strobe Effect 0-20 Hz
Maintenance Clean lens with soft dry cloth; ensure ventilation grills are dust-free
Safety Overheat protection; use safety cable when hanging
Spare Parts Availability Contact Infinity dealer for replacement LEDs, power supply, or control board
Repairability Modular design; serviceable by qualified technicians

Frequently Asked Questions - TCYC-7 Cyclorama INFINITY

How do I set the DMX address on the TCYC-7?
Press the Menu button until the DMX address setting appears. Use the Up/Down buttons to select the desired address, then press Enter to confirm.
What is the recommended mounting distance from the cyclorama?
Typically, place the fixture 1 to 2 meters from the cyclorama wall to achieve even coverage. Adjust based on the desired beam spread.
Can I use this fixture outdoors?
No, the TCYC-7 has an IP20 rating and is designed for indoor use only. Exposure to moisture may cause damage.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid abrasive cleaners that may scratch the lens.
What should I do if the fixture overheats?
The fixture has automatic overheating protection. If it shuts off, allow it to cool down, ensure ventilation is clear, and reduce ambient temperature if possible.
How many TCYC-7 fixtures can I daisy-chain?
You can daisy-chain up to 32 fixtures on a single DMX line. Ensure proper termination with a 120-ohm resistor at the end.
What color modes are available?
The TCYC-7 supports RGBW color mixing, plus pre-programmed color macros and a color temperature adjustment mode (if applicable).
How do I update the firmware?
Firmware updates require a special DMX interface. Contact Infinity support or consult the manual for the latest update procedure.
Is the TCYC-7 compatible with wireless DMX?
The fixture does not have built-in wireless DMX. However, you can use an external wireless DMX transmitter/receiver to control it wirelessly.
What safety precautions should I take when hanging the fixture?
Always use a secondary safety cable rated for at least 10 times the weight of the fixture. Ensure the mounting bracket is securely tightened.

User questions about TCYC-7 Cyclorama INFINITY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual TCYC-7 Cyclorama - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TCYC-7 Cyclorama by INFINITY.

USER MANUAL TCYC-7 Cyclorama INFINITY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : INFINITY

Model : TCYC-7 Cyclorama

Category : Lighting