VoiceLive Touch - Uncategorized TC ELECTRONIC - Free user manual and instructions
Find the device manual for free VoiceLive Touch TC ELECTRONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vocal Processor / Effects Unit |
| Brand | TC Electronic |
| Model | VoiceLive Touch |
| Color | Black with white accents |
| Display | 2.8-inch color touchscreen |
| Effects | Reverb, Delay, Chorus, Pitch Correction, Harmony |
| Harmony Modes | Up to 4-part harmonies |
| Looper | Built-in looper with up to 30 seconds recording time |
| Microphone Input | XLR (phantom power available) |
| Instrument Input | 1/4" TS for guitar or line |
| Headphone Output | 1/4" stereo jack |
| USB Port | For firmware updates and audio streaming |
| Power Supply | 6 x AA batteries or 9V DC adapter (not included) |
| Dimensions (W x D x H) | 165 x 95 x 40 mm |
| Weight | 400 g (without batteries) |
| Construction | Plastic chassis with rubber base |
| Presets | Over 50 factory presets for various effects |
| Editing | Onboard touchscreen editing or via software |
| Compatibility | Works with dynamic and condenser microphones |
Frequently Asked Questions - VoiceLive Touch TC ELECTRONIC
How do I connect the VoiceLive Touch to my microphone?
Connect your microphone to the XLR input on the rear panel. Ensure phantom power is enabled if using a condenser microphone. You can adjust the gain using the knob on the side.
Can I use the VoiceLive Touch as a USB audio interface?
Yes, the VoiceLive Touch can be used as a USB audio interface for recording or live streaming. Connect it to your computer via the USB port and select it as your audio device in your DAW.
How many harmonies can I create at once?
The VoiceLive Touch can generate up to 4-part harmonies. You can choose the harmony key and scale type from the touchscreen menu.
How do I save my custom presets?
To save a preset, press the 'Save' button on the touchscreen, select an empty preset slot, and confirm. You can later recall it from the preset browser.
What type of batteries does the VoiceLive Touch require?
It uses 6 AA batteries (alkaline or rechargeable). Battery life is approximately 6 hours with normal use. Alternatively, you can use a 9V DC adapter (center positive, 300mA).
How do I update the firmware?
Download the latest firmware from the TC Electronic website. Connect the VoiceLive Touch to your computer via USB, then run the updater tool. Follow the on-screen instructions.
Can I use the looper while applying effects?
Yes, the looper works independently from the effects. You can layer loops with harmonies and other effects active. Simply press the 'Looper' button to start recording.
How do I reset the device to factory settings?
Press and hold the 'Preset' button while turning on the unit. A prompt will appear on the screen; confirm to reset all settings to factory defaults.
What is the maximum loop time?
The looper can record up to 30 seconds of audio. You can overdub multiple times within that limit.
Can I connect a guitar to the VoiceLive Touch?
Yes, there is a 1/4' TS input for guitar or other instruments. However, note that it is designed primarily for vocals, so guitar effects are limited to basic reverb and delay.
User questions about VoiceLive Touch TC ELECTRONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VoiceLive Touch - TC ELECTRONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VoiceLive Touch by TC ELECTRONIC.
USER MANUAL VoiceLive Touch TC ELECTRONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TC ELECTRONIC
Model : VoiceLive Touch
Category : Uncategorized