Outdoor Stage Par Tri TR1 - Uncategorized Stairville - Free user manual and instructions
Find the device manual for free Outdoor Stage Par Tri TR1 Stairville in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor LED Par Light |
| Brand | Stairville |
| Model | Outdoor Stage Par Tri TR1 |
| Light Source | 3 x 10W RGB (tri-color) LEDs |
| Beam Angle | 25° |
| DMX Channels | 3/5/7 selectable |
| Control Protocol | DMX512 |
| Operating Modes | DMX, Master/Slave, Auto, Sound Active |
| IP Rating | IP65 |
| Housing Material | Aluminum die-cast |
| Dimensions (L x W x H) | 300 x 250 x 350 mm |
| Weight | 3.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 60 W |
| Fuse | F 2A 250V |
| Mounting | Floor standing or hanging bracket |
| Cooling | Convection |
| Display | 4-digit LED display with menu buttons |
| DMX Connectors | 3-pin XLR in/out |
| Power Connectors | PowerCON in/out |
| Accessories Included | Power cable, DMX cable (optional), mounting bracket |
| Maintenance | Clean with a dry cloth, avoid moisture and solvents |
| Safety | Automatic fuse protection, grounded |
| Repairability | Replaceable fuse, LED module and power supply unit |
Frequently Asked Questions - Outdoor Stage Par Tri TR1 Stairville
How do I set the DMX address on the Outdoor Stage Par Tri TR1?
Press the Menu button to enter the settings. Use the Up/Down buttons to navigate to 'ADDR', then press Enter. Set the address using the Up/Down buttons and confirm with Enter. The display will show the current DMX address.
What is the IP rating of this fixture?
The fixture has an IP65 rating, meaning it is dust-tight and protected against water jets from any direction. It is suitable for outdoor use.
How many DMX channels does it use?
It can be configured to use 3, 5, or 7 channels. In 3-channel mode, it controls red, green, and blue. In 5-channel mode, it adds dimmer and strobe. In 7-channel mode, it includes additional color macros and LED speed.
Can I use the fixture in Master/Slave mode?
Yes. Set one fixture as Master (mode 'MAST') and others as Slave (mode 'SLAV'). The slave fixtures will replicate the master's output. Connect them via DMX cables.
What is the power consumption of the Outdoor Stage Par Tri TR1?
The maximum power consumption is 60 watts. It operates on 100-240 V AC, 50/60 Hz.
How do I clean the fixture?
Disconnect from power. Use a soft, dry cloth to wipe the housing and lens. Do not use water, solvents, or abrasive cleaners. Ensure the lens is free of dust for optimal light output.
What type of LEDs does it use?
It uses 3 x 10W RGB (tri-color) LEDs, each capable of producing a wide range of colors by mixing red, green, and blue.
Is the fixture suitable for outdoor use in rain?
Yes, with an IP65 rating it is designed for outdoor use and can withstand rain and water jets. However, never submerge it.
How do I replace the fuse?
Disconnect the power. Locate the fuse holder near the power input. Open it with a screwdriver and replace the blown fuse with a 2A 250V fast-blow fuse. Do not use a higher rating.
What is the beam angle of this par light?
The beam angle is 25 degrees, providing a focused spot suitable for stage lighting and uplighting.
User questions about Outdoor Stage Par Tri TR1 Stairville
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Outdoor Stage Par Tri TR1 - Stairville and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Outdoor Stage Par Tri TR1 by Stairville.