ADAM-5000/TCP - Programmable Logic Controller Advantech - Free user manual and instructions
Find the device manual for free ADAM-5000/TCP Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Data Acquisition and Control Module |
| Model | ADAM-5000/TCP |
| Brand | Advantech |
| Dimensions (W x H x D) | 230 mm x 110 mm x 75 mm |
| Weight | Approx. 0.6 kg |
| Power Supply | 10 to 30 V DC |
| Power Consumption | 2.5 W typical |
| Communication Interface | Ethernet (TCP/IP), 10/100 Base-T |
| Supported Protocols | Modbus/TCP, TCP/IP, UDP |
| Analog Input Channels | Up to 8 differential or 16 single-ended |
| Digital I/O Channels | Up to 16 digital input and 16 digital output |
| Analog Input Resolution | 16-bit |
| Sampling Rate | Up to 10 kHz per channel |
| Operating Temperature | -10°C to 70°C |
| Storage Temperature | -20°C to 85°C |
| Humidity | 5% to 95% non-condensing |
| Protection | ESD protection, overvoltage protection |
| Mounting | DIN rail mountable |
| Maintenance | Clean with a dry, soft cloth; avoid solvents |
| Spare Parts | Available via Advantech distributors |
| Repairability | Module replacement recommended; no user-serviceable parts |
Frequently Asked Questions - ADAM-5000/TCP Advantech
How do I configure the IP address of the ADAM-5000/TCP?
Use the ADAM-5000 Utility software or a web browser to set the IP address. Default IP is 192.168.1.1. Connect via Ethernet and run the utility to assign a new static IP.
What protocols does the ADAM-5000/TCP support?
It supports Modbus/TCP, TCP/IP, and UDP. It can also communicate with Advantech's proprietary protocol for seamless integration.
How many analog inputs can I connect?
Up to 8 differential or 16 single-ended analog input channels, depending on wiring configuration.
Can the ADAM-5000/TCP be used in harsh environments?
Yes, it operates from -10°C to 70°C and has ESD protection. Suitable for industrial environments.
What power supply is required?
A 10 to 30 V DC power supply is required. Typical power consumption is about 2.5 W.
Is the ADAM-5000/TCP compatible with older ADAM modules?
Yes, it is backward compatible with ADAM-4000 and ADAM-5000 series modules using the same I/O expansion bus.
How do I factory reset the module?
Press and hold the Reset button (located on the front panel) for 5 seconds while powering on. This restores default IP settings.
Can I use the ADAM-5000/TCP with a PLC?
Yes, it supports Modbus/TCP, making it easy to integrate with most PLCs and SCADA systems.
What is the maximum cable length for analog inputs?
For accurate measurements, keep analog input cables below 100 meters. Shielded twisted-pair cable is recommended.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com or the Advantech support site. It contains detailed wiring and configuration instructions.
User questions about ADAM-5000/TCP Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Programmable Logic Controller in PDF format for free! Find your manual ADAM-5000/TCP - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADAM-5000/TCP by Advantech.
USER MANUAL ADAM-5000/TCP Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : ADAM-5000/TCP
Category : Programmable Logic Controller