SG200-50FP - Switch CISCO - Free user manual and instructions
Find the device manual for free SG200-50FP CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch with PoE+ |
| Model Number | SG200-50FP |
| Ports | 48 x 10/100/1000 PoE+ ports + 2 x Gigabit SFP uplink ports |
| PoE Budget | 370W total |
| Switching Capacity | 96 Gbps |
| Forwarding Rate | 71.4 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | Up to 256 active VLANs |
| Management | Web-based GUI, CLI, SNMP, Cisco Smart Network Application (SNA) |
| Power Supply | Internal, 100-240V AC, 50/60Hz |
| Power Consumption | Max 430W (with PoE) |
| Dimensions (W x D x H) | 17.3 x 10.5 x 1.7 in (440 x 267 x 44 mm) |
| Weight | 11.0 lb (5.0 kg) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 10% to 90% (non-condensing) |
| Safety Compliance | UL (UL 60950-1), CE, FCC Part 15 Class A |
| Mounting | Rack-mountable (1U), includes mounting kit |
| Cooling | Built-in fans, rear exhaust |
| Jumbo Frame Support | Up to 9K (9216 bytes) |
| Link Aggregation | Up to 8 groups, up to 8 ports per group |
| Spanning Tree Protocol | IEEE 802.1D, 802.1w, 802.1s |
Frequently Asked Questions - SG200-50FP CISCO
How do I reset the Cisco SG200-50FP to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the System LED flashes. The switch will reboot with factory settings.
What is the PoE power budget of the SG200-50FP?
The total PoE budget is 370 watts across all PoE ports, sufficient to power devices like IP cameras, phones, and wireless access points.
Can I manage the switch via a web interface?
Yes, the SG200-50FP supports a web-based GUI for configuration. Access it by entering the switch's IP address in a browser, then log in with the default credentials (admin/admin or similar).
Does this switch support VLANs?
Yes, it supports up to 256 active VLANs with IEEE 802.1Q tagging, allowing network segmentation.
What are the default IP settings?
Out of the box, the switch tries to obtain an IP via DHCP. If no DHCP server is found, it defaults to 192.168.1.254 with subnet mask 255.255.255.0.
Can I use fiber uplinks with this switch?
Yes, it has 2 combo SFP uplink ports that accept Gigabit SFP modules for fiber or copper connections.
What is the maximum cable length for the Ethernet ports?
The copper ports support 100 meters (328 feet) on Category 5e or better cable.
Does the switch support link aggregation?
Yes, you can create up to 8 link aggregation groups (LAGs), each with up to 8 ports, using static or LACP configuration.
How do I update the firmware?
Download the latest firmware from the Cisco support site, then upload it via the Administration > File Management page in the web interface. The switch will reboot after successful update.
What is the warranty period for this switch?
The Cisco SG200-50FP typically comes with a limited lifetime warranty. Check your specific purchase terms for details.
User questions about SG200-50FP CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual SG200-50FP - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SG200-50FP by CISCO.
USER MANUAL SG200-50FP CISCO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CISCO
Model : SG200-50FP
Category : Switch