USS10 - Subwoofer Rockville - Free user manual and instructions
Find the device manual for free USS10 Rockville in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Rockville |
| Model | USS10 |
| Size | 10 inches |
| Impedance | 4 Ohms (Single Voice Coil) |
| Power Handling (RMS) | 600 Watts |
| Power Handling (Peak) | 1200 Watts |
| Sensitivity | 92 dB (1W/1m) |
| Frequency Response | 25 Hz - 500 Hz |
| Mounting Depth | 5.5 inches |
| Mounting Hole Diameter | 9.25 inches |
| Recommended Enclosure Volume (Sealed) | 0.75 - 1.0 cu ft |
| Recommended Enclosure Volume (Ported) | 1.25 - 1.5 cu ft |
| Voice Coil | 2-inch, 4-Ohm |
| Surround Material | Rubber |
| Cone Material | Non-pressed Paper with Mica |
| Basket Material | Cast Aluminum |
| Overall Diameter | 10.75 inches |
| Weight | 12.5 lbs |
| Power Connection | Spring-loaded terminals |
| Care Instructions | Wipe with dry cloth; avoid moisture |
| Safety Warnings | Keep away from water; use in well-ventilated area |
| Replacement Parts | Contact Rockville customer service |
| Repairability | Professional repair recommended |
Frequently Asked Questions - USS10 Rockville
What is the recommended enclosure type for the Rockville USS10?
The Rockville USS10 works well in both sealed and ported enclosures. For sealed boxes, use 0.75-1.0 cu ft; for ported, 1.25-1.5 cu ft with a tuning frequency around 35 Hz.
What is the RMS power rating of the USS10?
The USS10 has an RMS power handling of 600 Watts and a peak power handling of 1200 Watts.
What is the impedance of the Rockville USS10?
The USS10 has a single 4-Ohm voice coil, making it a 4-Ohm subwoofer.
What is the mounting depth of the USS10?
The mounting depth is approximately 5.5 inches, so ensure your enclosure provides enough clearance.
Can I use the USS10 in a free-air installation?
No, the USS10 is designed for use in an enclosed box. Running it free-air can damage the subwoofer due to lack of damping.
What size enclosure does the USS10 need?
For a sealed box, 0.75-1.0 cubic feet; for a ported box, 1.25-1.5 cubic feet.
How do I break in the Rockville USS10?
Play music at moderate volume (50-70% of RMS) for 10-20 hours to allow the suspension to loosen. Avoid heavy bass during break-in.
What power amplifier should I use with the USS10?
Use an amplifier that delivers 500-700 Watts RMS at 4 Ohms. Ensure the amp is stable at 4 Ohms.
Is the USS10 compatible with a ported box?
Yes, it works well in a ported enclosure. Tune the port to about 35 Hz for optimal output.
How do I clean the USS10?
Gently wipe the cone and surround with a dry microfiber cloth. Do not use water or cleaning solutions.
User questions about USS10 Rockville
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual USS10 - Rockville and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. USS10 by Rockville.
USER MANUAL USS10 Rockville
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rockville
Model : USS10
Category : Subwoofer