PRO 215-5 - Measuring equipment Senseca - Free user manual and instructions
Find the device manual for free PRO 215-5 Senseca in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Environmental Meter (Temperature/Humidity) |
| Model | PRO 215-5 |
| Brand | Senseca |
| Dimensions | 152 x 72 x 32 mm |
| Weight | 195 g (with batteries) |
| Power Supply | 2 x AAA batteries (1.5V) |
| Battery Life | Approximately 200 hours of continuous use |
| Measurement Functions | Temperature, Relative Humidity, Dew Point, Wet Bulb Temperature |
| Temperature Range | -20°C to 60°C (-4°F to 140°F) |
| Humidity Range | 0% to 100% RH |
| Accuracy (Temperature) | ±0.5°C (from 0°C to 50°C), ±1°C (else) |
| Accuracy (Humidity) | ±3% RH (from 20% to 80% RH), ±5% RH (else) |
| Display | Backlit LCD, dual reading |
| Data Hold | Yes |
| Auto Power Off | After 10 minutes of inactivity (configurable) |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Storage Conditions | 0°C to 50°C, <80% RH (non-condensing) |
| Safety | Do not expose to extreme temperatures or direct sunlight. Keep dry. |
| Warranty | 2 years |
| Included Accessories | Meter, protective holster, batteries, user manual |
Frequently Asked Questions - PRO 215-5 Senseca
How do I turn on the PRO 215-5?
Press the Power button located on the front panel. The display will light up briefly. To turn off, press and hold the same button for 2 seconds.
What batteries does it use and how do I replace them?
It uses two AAA 1.5V batteries. Open the battery compartment on the back by sliding the cover down. Insert batteries with correct polarity, then close the cover.
How do I clean the sensor?
Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol (70%). Gently wipe the sensor openings. Do not apply pressure or use abrasive cleaners.
What is the measurement range for temperature and humidity?
Temperature range is -20°C to 60°C (-4°F to 140°F). Humidity range is 0% to 100% RH. Exceeding these ranges may damage the sensor.
How accurate are the readings?
Temperature accuracy is ±0.5°C between 0°C and 50°C, and ±1°C otherwise. Humidity accuracy is ±3% RH from 20% to 80% RH, and ±5% RH elsewhere.
Can I use this meter outdoors?
Yes, but avoid direct exposure to rain or extreme conditions. The meter is not waterproof. Use the provided holster for added protection.
How do I enable the backlight?
Press the Backlight button (marked with a sun icon). The backlight will stay on for 15 seconds. To disable, press again.
What is the auto-power-off setting?
By default, the meter turns off after 10 minutes of inactivity. To disable, press and hold the Power button for 5 seconds until 'APO' disappears from the display. Repeat to re-enable.
How do I switch between Celsius and Fahrenheit?
Press and hold the Mode button for 3 seconds. The temperature unit will toggle. Release when desired unit appears.
Does the PRO 215-5 require calibration?
The factory calibration is sufficient for most users. For critical applications, annual recalibration is recommended. Contact Senseca support for calibration services.
User questions about PRO 215-5 Senseca
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual PRO 215-5 - Senseca and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO 215-5 by Senseca.
USER MANUAL PRO 215-5 Senseca
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Senseca
Model : PRO 215-5
Category : Measuring equipment