F-1002MRJZ-C - Ice machine Hoshizaki - Free user manual and instructions
Find the device manual for free F-1002MRJZ-C Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Ice Machine |
| Ice Type | Cubelet (Crescent or Dice) |
| Ice Production Capacity | Up to 1000 lbs (454 kg) per 24 hours |
| Storage Capacity | Requires separate ice bin (not included) |
| Dimensions (W x D x H) | 48.5 x 28.3 x 38.5 in (1232 x 719 x 978 mm) |
| Weight | 295 lbs (134 kg) |
| Electrical Requirements | 115V/60Hz, 15 Amps, single phase |
| Refrigerant | R-404A |
| Condenser Type | Air-cooled (remote condenser option available) |
| Water Supply | Inlet: 1/2" FPT; Drain: 3/4" FPT |
| Key Features | Automatic cleaning cycle, energy-efficient operation, stainless steel exterior, insulated bin compatibility |
| Materials | Stainless steel cabinet and evaporator |
| Installation | Indoor use, proper ventilation required, level floor |
| Maintenance | Monthly cleaning of ice-making system and condenser |
| Safety Features | Bin control switch, overflow protection, auto shut-off when bin full |
| Parts and Repairability | Authorized service parts available; self-diagnostic error codes |
| General Information | Commercial grade, NSF/ANSI 12 Standard certified |
Frequently Asked Questions - F-1002MRJZ-C Hoshizaki
How do I clean the ice machine?
You should run the automatic cleaning cycle using Hoshizaki recommended cleaner. Remove and wash the ice drop curtain, water trough, and sump cover with warm soapy water. Rinse thoroughly. Refer to the manual for the detailed procedure.
What does error code 'E1' mean?
Error code 'E1' indicates a bin thermostat problem. Check the bin thermostat probe and wiring. The ice machine may not shut off properly. Contact a qualified technician if the issue persists.
Why is the ice production low?
Low ice production can be due to a dirty condenser, reduced water flow from a clogged filter, incorrect ambient temperature, or low refrigerant charge. Inspect these components and clean or service as needed.
Does this model require a water filter?
It is strongly recommended to use a water filter to prevent scale buildup and ensure ice quality. Hoshizaki offers a filter kit (part number 23762901). The filter should be changed every 6 months or when the pressure drops.
What are the installation space requirements?
Allow at least 6 inches (15 cm) of clearance on all sides for ventilation. The floor must be level and capable of supporting the weight (over 300 lbs when operating). An ice bin is required (sold separately).
What power supply is needed?
The F-1002MRJZ-C requires a 115V, 60 Hz, 15 Amp dedicated circuit with a grounded outlet. It should be protected with a time-delay fuse or circuit breaker.
What are the dimensions of this ice machine?
The machine measures approximately 48.5 inches wide, 28.3 inches deep, and 38.5 inches high. Exact dimensions are provided in the manual. It is a modular unit that sits on top of a bin.
How long is the warranty period?
Hoshizaki offers a 3-year warranty on the ice machine (labor and parts) and a 5-year warranty on the compressor. Warranty may vary by region; check your purchase documents.
Why is the machine making noise?
Normal operating sounds include water flow, compressor hum, and fan noise. Excessive noise may indicate loose components, ice harvest sounds, or vibration. Ensure the unit is level and check for ice in the bin hitting the drop curtain.
How do I adjust ice cube size?
Ice cube size is factory-set and not user adjustable. Some models have a water level adjustment screw, but improper adjustment may affect performance. Contact a technician if you need a different cube size.
User questions about F-1002MRJZ-C Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual F-1002MRJZ-C - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F-1002MRJZ-C by Hoshizaki.