177MIX8GWH - Hand blender Avantco - Free user manual and instructions
Find the device manual for free 177MIX8GWH Avantco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hand Blender |
| Brand | Avantco |
| Model | 177MIX8GWH |
| Power Source | 120V / 60Hz, 650W |
| Variable Speed | Yes, with adjustable dial |
| Shaft Material | Stainless steel |
| Shaft Length | Approximately 12 inches (30 cm) |
| Overall Length | Approximately 22 inches (56 cm) |
| Weight | Approximately 6 lbs (2.7 kg) |
| Motor Housing Material | Ergonomic, impact-resistant plastic |
| Blade Design | Heavy-duty, fixed stainless steel blade |
| Wet/Dry Operation | Wet operation only; not intended for dry blending |
| Safety Features | Overload protection, non-slip grip |
| Cleaning Method | Detachable shaft; hand wash shaft and blade, wipe motor housing with damp cloth |
| Dishwasher Safe Parts | Shaft and blade assembly only (top rack recommended) |
| Accessories Included | Measuring beaker (1L) and hanging hook |
| Replacement Parts Available | Blade assembly, shaft, beaker, motor unit |
Frequently Asked Questions - 177MIX8GWH Avantco
How do I attach the shaft to the motor unit?
Line up the two notches on the shaft with the slots on the motor unit, then push and twist clockwise until it locks into place.
Can I blend hot liquids?
Yes, but allow liquids to cool to at least 175°F (80°C) to avoid splashing. Never immerse the motor housing.
How do I clean the hand blender?
Detach the shaft and rinse it under warm water. Use a soft brush to remove debris from the blade. Wipe the motor housing with a damp cloth. Do not submerge the motor unit.
What is the maximum operating time?
The blender can run continuously for up to 30 seconds. For longer tasks, allow it to cool for 2 minutes between uses.
Are replacement parts available?
Yes, you can order the blade assembly (part #177MIX8GWH-BLADE), shaft (177MIX8GWH-SHAFT), and beaker (177MIX8GWH-BEAKER) from Avantco or authorized dealers.
Is the blender NSF certified?
Yes, this model is NSF certified for commercial use, ensuring it meets strict sanitation standards.
What is the warranty period?
Avantco offers a 2-year limited warranty on parts and labor for the 177MIX8GWH.
Can I use it to crush ice?
No, this hand blender is not designed for ice crushing. It is intended for blending, pureeing, and emulsifying liquids and soft foods.
How do I change the speed?
Rotate the speed dial on top of the motor unit. Low speeds are for gentle stirring, high speeds for blending and pureeing.
What should I do if the blender stops working?
First, check the power outlet and cord. If it still does not work, allow the motor to cool for 15 minutes to reset the overload protection. If the problem persists, contact Avantco service.
User questions about 177MIX8GWH Avantco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hand blender in PDF format for free! Find your manual 177MIX8GWH - Avantco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 177MIX8GWH by Avantco.
USER MANUAL 177MIX8GWH Avantco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Avantco
Model : 177MIX8GWH
Category : Hand blender