IP Pixelstrip 80 - Lighting Showtec - Free user manual and instructions
Find the device manual for free IP Pixelstrip 80 Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Pixel Strip Light |
| Model | IP Pixelstrip 80 |
| Brand | Showtec |
| LED Count | 80 LEDs per meter |
| Length | 1 meter (customizable) |
| Width | 12 mm |
| Height | 8 mm |
| Weight | 0.3 kg |
| Power Supply | 24V DC |
| Max Power Consumption | 15 W |
| IP Rating | IP65 (water and dust resistant) |
| Control Protocol | DMX512 |
| Color Modes | RGB, static colors, color chase, fade |
| Operating Temperature | -20°C to +40°C |
| Mounting | Adhesive backing or mounting brackets |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Low voltage, suitable for indoor/outdoor use |
| Spare Parts | Connectors, mounting clips, power supply |
| Warranty | 2 years |
Frequently Asked Questions - IP Pixelstrip 80 Showtec
What is the IP rating of the Showtec IP Pixelstrip 80?
The IP rating is IP65, making it resistant to dust and low-pressure water jets.
Can I cut the strip to a shorter length?
Yes, the strip can be cut at designated cut points, typically every 2 LEDs. Ensure you reseal the end if used outdoors.
What power supply do I need?
You need a 24V DC power supply. The total current depends on the length; a 1-meter strip draws about 0.6A.
How do I control the strip?
The strip supports DMX512 control. You can use a DMX controller or a compatible lighting desk for addressing and effects.
Can I use this strip outdoors?
Yes, thanks to its IP65 rating, it is suitable for outdoor use but should not be submerged.
What is the maximum length I can run?
Without signal amplification, the maximum recommended length is 5 meters. For longer runs, use a DMX repeater or amplifier.
How do I connect multiple strips?
You can connect strips in series using provided connectors. Ensure the total power draw does not exceed the power supply rating.
What are the available color modes?
The strip offers RGB color mixing, static colors, color chase, and fade effects, controllable via DMX.
Does the strip come with a remote control?
No, the strip is designed for DMX control. A separate DMX controller or software is required.
How do I clean the strip?
Use a dry, soft cloth to wipe the surface. Avoid water or chemical cleaners to prevent damage.
User questions about IP Pixelstrip 80 Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual IP Pixelstrip 80 - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IP Pixelstrip 80 by Showtec.
USER MANUAL IP Pixelstrip 80 Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : IP Pixelstrip 80
Category : Lighting