HVF18B - Fan ElectriQ - Free user manual and instructions
Find the device manual for free HVF18B ElectriQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pedestal Fan |
| Brand | ElectriQ |
| Model | HVF18B |
| Fan Diameter | 18 inches (45 cm) |
| Height Adjustment | Adjustable from 110 cm to 140 cm |
| Base Diameter | 40 cm |
| Net Weight | 5.2 kg |
| Power Supply | 220-240V, 50Hz |
| Power Consumption | 60 W |
| Speed Settings | 3 speed levels (Low, Medium, High) |
| Oscillation | Wide-angle oscillation (approx. 90°) |
| Tilt Adjustment | Manual tilt up/down |
| Remote Control | Included (battery operated) |
| Timer | Up to 7.5 hours |
| Control Type | Electronic panel with LED display |
| Safety Features | Overheat protection, tip-over switch |
| Blades Material | ABS plastic |
| Grille Material | Steel with anti-rust coating |
| Cleaning | Wipe with damp cloth; do not immerse |
| Noise Level | Approx. 50-60 dB depending on speed |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - HVF18B ElectriQ
How do I assemble the ElectriQ HVF18B fan?
Start by attaching the base to the pole, then slide the fan head onto the pole and tighten the screws. Refer to the manual for detailed steps.
How do I clean the fan?
Unplug the fan, use a soft damp cloth to wipe the grille and blades. Do not use abrasive cleaners or immerse in water.
Why is the fan not oscillating?
Ensure the oscillation button on the remote or panel is activated. If still not working, check if the fan is tilted at a correct angle.
Does the remote control require batteries?
Yes, the remote uses 2 AAA batteries (not included). Replace them if the fan does not respond to remote commands.
How do I set the timer?
Press the timer button repeatedly to cycle through options (0.5 to 7.5 hours). The fan will automatically shut off after the set time.
What should I do if the fan stops suddenly?
Check if the overheat protection has activated. Let it cool down for 30 minutes, then try again. Also ensure the fan is on a stable surface.
Can I use the fan outdoors?
This fan is designed for indoor use only. Do not expose it to rain or moisture.
How do I adjust the fan height?
Loosen the height adjustment collar, slide the inner pole to the desired height, then tighten the collar securely.
Is the fan noisy?
At low speed it runs quietly. At high speed, some motor noise is normal. If excessive, check for loose screws or blade imbalance.
Where can I find spare parts?
Contact ElectriQ customer service or visit the official website for replacement blades, screws, or remote controls.
User questions about HVF18B ElectriQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual HVF18B - ElectriQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HVF18B by ElectriQ.