35879 - Measuring equipment Draper - Free user manual and instructions
Find the device manual for free 35879 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measuring Equipment |
| Brand | Draper |
| Model | 35879 |
| Application | General purpose measurement for electrical parameters |
| Dimensions (H x W x D) | Approx. 150 x 75 x 35 mm |
| Weight | Approx. 300 g (including battery) |
| Power Supply | 9V battery (PP3 type) |
| Display | LCD, 4000 counts |
| AC Voltage Range | 0 to 600 V |
| DC Voltage Range | 0 to 600 V |
| AC Current Range | 0 to 10 A |
| DC Current Range | 0 to 10 A |
| Resistance Range | 0 to 40 MΩ |
| Capacitance Range | 0 to 100 µF |
| Frequency Range | 0 to 10 MHz |
| Diode Test | Yes |
| Continuity Test | Yes (buzzer) |
| Accuracy (DC Voltage) | ±0.5% + 2 digits |
| Safety Category | CAT II 600 V |
| Accessories Included | Test leads, 9V battery, manual |
| Care & Cleaning | Wipe with a dry cloth; do not use solvents |
| Storage Temperature | -10°C to 50°C |
| Operating Temperature | 0°C to 40°C |
| Repairability | User replaceable battery and fuse; professional repair for other issues |
Frequently Asked Questions - 35879 Draper
How do I measure AC voltage with the Draper 35879?
Set the rotary switch to the V~ position. Connect the black lead to COM and red lead to V/Ω. Place probes across the circuit. Read the value on the display.
How do I replace the battery in the 35879?
Turn off the meter. Remove the screw on the back cover. Lift the cover. Replace the 9V battery with a new one. Reattach the cover and screw.
What is the accuracy of the resistance measurement?
The accuracy for resistance is ±1% + 5 digits in the 400 Ω range, and ±0.8% + 3 digits for higher ranges. Refer to manual for full specs.
Can I measure current above 10A?
No, the maximum current input is 10A for both AC and DC. Exceeding this may blow the fuse and damage the meter.
How do I perform a continuity test?
Set the rotary switch to the continuity position (usually a diode symbol with sound waves). Connect probes: the buzzer will sound if resistance is below ~30 Ω.
Is the Draper 35879 safe for measuring mains voltage?
Yes, it is rated CAT II 600V, suitable for measurements on single-phase appliances and outlets. Do not use on industrial three-phase systems.
What does the 'HOLD' button do?
Pressing HOLD freezes the current reading on the display. Press again to release. Useful for capturing measurements in hard-to-see locations.
How do I clean the meter?
Use a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the terminals clean and dry.
What is the frequency range for frequency measurement?
The frequency measurement range is 0 to 10 MHz. Input voltage must be at least 1V RMS. Set the switch to Hz position.
Where can I download the full manual for the Draper 35879?
The manual is available for free download at notice-facile.com in PDF format. Search for 'Draper 35879 manual'.
User questions about 35879 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 35879 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 35879 by Draper.
USER MANUAL 35879 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 35879
Category : Measuring equipment