AT-X230-18GP - Switch Allied Telesis - Free user manual and instructions
Find the device manual for free AT-X230-18GP Allied Telesis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet PoE+ Switch |
| Model | AT-X230-18GP |
| Ports | 16 x 10/100/1000 PoE+ ports, 2 x Gigabit Combo (RJ45/SFP+) |
| PoE Budget | Total PoE power budget: 250W (up to 30W per port) |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | IEEE 802.1Q VLAN, up to 4094 VLANs |
| Management | Web GUI, CLI via console or SSH, SNMP v1/v2c/v3, RMON |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (1U rack mount) |
| Weight | 2.8 kg |
| Power Supply | Internal AC power supply, 100-240V, 50-60Hz, Max 250W |
| Power Consumption | Max 250W (with PoE load) |
| Cooling | 1 x fan (smart fan control) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Safety | Keep away from moisture; use provided power cord; do not block vents |
| Cleaning | Use a dry, soft cloth; do not use liquids or sprays |
| Spare Parts | Optional hot-swappable fan modules; power supply unit (PSU) replaceable |
| Warranty | Limited lifetime warranty (see documentation) |
Frequently Asked Questions - AT-X230-18GP Allied Telesis
How do I reset the Allied Telesis AT-X230-18GP to factory defaults?
Press and hold the reset button located on the front panel for about 10 seconds using a paperclip. The switch will reboot with factory settings.
What is the maximum PoE power per port on this switch?
Each PoE+ port can deliver up to 30 watts (IEEE 802.3at). The total PoE budget is 250 watts.
Does the switch support VLAN configuration?
Yes, it supports IEEE 802.1Q VLANs with up to 4094 VLAN groups. VLANs can be configured via the web interface or CLI.
How can I access the management interface?
By default, the switch has IP address 192.168.1.1. Connect via a web browser using an ethernet cable; login credentials are typically 'admin'/'admin'. You may also use CLI via console cable.
What are the SFP+ slots used for?
The two combo ports can be used as GBIC/SFP+ for fiber connections (1G or 10G) or as regular Gigabit ethernet ports.
Can I mount this switch on a rack?
Yes, the switch is 1U high and comes with rack-mount brackets. It can be mounted in a standard 19-inch rack.
How do I update the firmware?
Download the latest firmware from Allied Telesis website. Log into the web interface, go to 'Maintenance' > 'Firmware Update', and upload the file. The switch will reboot.
What is the default password for the switch?
Default username and password are both admin (case-sensitive). It is recommended to change the password upon initial setup.
Does the switch support SNMP?
Yes, it supports SNMP v1, v2c, and v3 for network management. You can configure SNMP traps and communities via the web GUI.
What should I do if the switch does not power on?
Check the power cable and the outlet. Ensure the power supply module is properly seated. If still not working, contact Allied Telesis support.
User questions about AT-X230-18GP Allied Telesis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual AT-X230-18GP - Allied Telesis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-X230-18GP by Allied Telesis.
USER MANUAL AT-X230-18GP Allied Telesis
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Allied Telesis
Model : AT-X230-18GP
Category : Switch