IPCP Pro 550 xi - Uncategorized Extron - Free user manual and instructions
Find the device manual for free IPCP Pro 550 xi Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Control Processor |
| Model | IPCP Pro 550 xi |
| Brand | Extron |
| Dimensions (H x W x D) | 1.75" x 17.0" x 6.0" (1U rack-mountable) |
| Weight | 2.3 kg (5 lbs) |
| Power Supply | Internal, 100-240 VAC, 50/60 Hz |
| Power Consumption | 30 watts |
| Ethernet Ports | 2 x RJ-45 (1 LAN, 1 AV LAN) |
| Serial Ports | 2 x RS-232 (9-pin D-sub) |
| IR Ports | 2 x 3.5 mm mini IR emitter |
| Relay Ports | 2 x configurable relays |
| USB Port | 1 x USB mini-B for configuration |
| Operating Temperature | 0 to 50 °C (32 to 122 °F) |
| Operating Humidity | 10% to 85% non-condensing |
| Supported Protocols | TCP/IP, UDP, HTTP, SSH, Telnet, SNMP |
| Mounting | Rackmount or tabletop with optional feet |
| Control Software | Global Configurator Plus/Professional, Global Scripter |
| Maintenance | Clean with dry cloth; avoid moisture |
| Safety | Install in ventilated area; do not cover vents |
| Spare Parts | Contact Extron support for replacement parts |
Frequently Asked Questions - IPCP Pro 550 xi Extron
How do I reset the IPCP Pro 550 xi to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until the Power LED blinks. Release and wait for reboot.
What software is required to program the device?
Use Global Configurator Plus or Global Configurator Professional from Extron. For advanced scripting, use Global Scripter.
Can I control the device via a web browser?
Yes, access the built-in web server by entering the IP address in a browser. Default credentials are admin/admin.
How do I assign a static IP address?
Connect via USB or serial, use the Global Configurator software or ARP command to set a static IP. Refer to the manual for details.
What is the maximum number of devices I can control?
This depends on network capacity, but the processor supports control of up to 250 devices via IP, serial, or IR.
Does the IPCP Pro 550 xi support PoE?
No, it requires an external power supply. The internal power supply accepts 100-240 VAC.
How do I update the firmware?
Download the latest firmware from Extron's website and use Firmware Loader via USB or network. Follow the included instructions.
The device is not responding to commands. What should I check?
Verify network connectivity, IP address settings, and that the correct baud rate (if serial) is configured. Reboot the device if needed.
Can I use this processor in a stacked configuration?
Yes, multiple units can be used in a system, but each must have a unique IP address. They can be managed via Global Configurator.
What LED indicators are on the front panel?
The front panel has Power (green), Link/Act (green for Ethernet), and Status (green/amber) LEDs to indicate operational status.
User questions about IPCP Pro 550 xi Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IPCP Pro 550 xi - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPCP Pro 550 xi by Extron.
USER MANUAL IPCP Pro 550 xi Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : IPCP Pro 550 xi
Category : Uncategorized