Invisible Series IS10W - Speaker SONANCE - Free user manual and instructions
Find the device manual for free Invisible Series IS10W SONANCE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Sonance |
| Model | Invisible Series IS10W |
| Product Type | In-wall Speaker |
| Driver Size | 10 inches |
| Impedance | 8 ohms |
| Power Handling (RMS) | 100 watts |
| Peak Power | 150 watts |
| Sensitivity | 88 dB (1W/1m) |
| Frequency Response | 40 Hz - 20 kHz |
| Cutout Dimensions | 11.5 x 11.5 inches (292 x 292 mm) |
| Overall Dimensions | 12.5 x 12.5 x 3.5 inches (318 x 318 x 89 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Mounting Type | Flush in-wall / in-ceiling |
| Grille | Paintable, micro-perforated |
| Recommended Amplifier Power | 20 - 150 watts per channel |
| Woofer Material | Polypropylene cone with rubber surround |
| Tweeter (if applicable) | 1-inch soft dome (coaxial) |
| Maintenance | Wipe with a dry, lint-free cloth |
| Safety | Install in accordance with local building codes |
| Replacement Parts | Contact Sonance customer service |
Frequently Asked Questions - Invisible Series IS10W SONANCE
Can I paint the speaker grille?
Yes, you can paint the micro-perforated grille with any standard latex paint to match your ceiling or wall.
What is the recommended amplifier power?
A 20 to 150 watts RMS per channel amplifier is recommended for optimal performance.
Can it be installed in a bathroom?
This speaker is not rated for high humidity. Avoid installation in bathrooms, saunas, or outdoor areas.
How do I cut the installation hole?
Use the included cutout template. Ensure there are no studs, wires, or pipes behind the intended location before cutting.
What is the required depth behind the wall?
A minimum 3.5 inches (89 mm) of clearance behind the drywall is needed to accommodate the speaker depth.
Does it come with a mounting bracket?
Yes, the speaker includes a mounting bracket and screws for secure installation.
Can I use it as a rear surround speaker?
Yes, it works well as a surround or height channel in a home theater setup.
What is the impedance of this speaker?
The impedance is 8 ohms, compatible with most home amplifiers and receivers.
How should I clean the speaker?
Wipe gently with a dry, lint-free cloth. Do not use water or cleaning agents as they may damage the grille.
Is it compatible with Sonance DSP amplifiers?
Yes, it works with Sonance DSP amplifiers for optimized sound and room correction.
User questions about Invisible Series IS10W SONANCE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Invisible Series IS10W - SONANCE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Invisible Series IS10W by SONANCE.
USER MANUAL Invisible Series IS10W SONANCE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SONANCE
Model : Invisible Series IS10W
Category : Speaker