JDC Burst 1 - Lighting GLP - Free user manual and instructions
Find the device manual for free JDC Burst 1 GLP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Wash Light |
| Light Source | 350W RGBW LED |
| Beam Angle | 5° - 50° motorized zoom |
| Pan / Tilt | 540° / 270° with 16-bit resolution |
| Color Mixing | RGBW + CTO linear color temperature control |
| Strobe | 0-25 Hz variable, random strobe, pulse effects |
| Dimming | Electronic 0-100% with 16-bit curves |
| Control Protocols | DMX512, RDM, Art-Net, sACN |
| DMX Channels | 22 / 28 / 34 (selectable) |
| Power Consumption | 450W maximum |
| Power Supply | 100-240V AC, 50/60 Hz with auto-ranging PFC |
| Dimensions (L x W x H) | 450 x 300 x 520 mm |
| Weight | 14.5 kg |
| IP Rating | IP20 (indoor use only) |
| Cooling | Convection with temperature-controlled fan |
| Mounting | Omega brackets with quick-lock for truss or floor |
| Safety Features | Safety cable attachment point, thermal cutoff, tilt lock |
| Maintenance | Clean optical lenses monthly; check fans quarterly |
| Spare Parts Available | LED module, power supply, mainboard, fans, lenses |
| Accessories | Optional diffusion filters, gel frame holder, flight case |
Frequently Asked Questions - JDC Burst 1 GLP
How do I connect the JDC Burst 1 to a DMX controller?
Use a standard 5-pin XLR cable to connect the DMX input of the fixture to your controller. Ensure the fixture is set to the correct DMX address via the menu. For large installations, terminate the DMX line with a 120 ohm resistor on the last fixture.
Can I use the fixture outdoors?
No, the JDC Burst 1 is rated IP20 and is designed for indoor use only. Exposure to moisture or dust may damage the electronics and void the warranty.
What is the recommended maintenance for the LED engine?
The LED module is sealed and requires no user maintenance. However, ensure the fixture is kept clean to avoid overheating. If the LED output decreases significantly after years of use, the module can be replaced by a qualified technician.
How do I reset the fixture to factory defaults?
Access the menu by pressing the control buttons, navigate to 'System Settings' or 'Reset', and select 'Factory Defaults'. Confirm the action. The fixture will reboot with default settings.
The fixture is not responding to DMX. What should I check?
First, verify the DMX cable is properly connected and not damaged. Check that the fixture's DMX address matches the controller's patch. Ensure the fixture is in 'DMX' mode, not 'Auto' or 'Sound' mode. Try replacing the DMX cable or testing with another fixture.
Can I use a dimmer pack to control the fixture?
No, the JDC Burst 1 is a DMX-controlled LED fixture and should not be connected to a dimmer pack for power. Dimmer packs can damage the internal power supply. Always connect directly to mains power.
What is the maximum operating temperature?
The fixture can operate in ambient temperatures from -10°C to 45°C (14°F to 113°F). Avoid placing it near heat sources or in direct sunlight to prevent overheating.
How do I update the firmware?
Firmware updates are performed via the DMX link using a dedicated software uploader. Connect the fixture to a PC running the GLP firmware tool, power on the fixture, and follow the instructions. Ensure a stable connection during the update.
The fan is making noise. Is this normal?
The fixture has a variable-speed fan that may become more audible when running at high power. If the noise is excessive or rattling, check for obstructions or a loose fan blade. Clean the fan vents regularly. If the problem persists, contact service.
What type of safety cable should I use?
Use a safety cable rated for at least 10 times the weight of the fixture (150 kg minimum). Attach it to the designated safety loop on the fixture and to the truss or support structure. Always double-check the cable is securely fastened.
User questions about JDC Burst 1 GLP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual JDC Burst 1 - GLP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JDC Burst 1 by GLP.
USER MANUAL JDC Burst 1 GLP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GLP
Model : JDC Burst 1
Category : Lighting