B33DHW - Dehumidifier BROAN - Free user manual and instructions
Find the device manual for free B33DHW BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dehumidifier |
| Brand | Broan |
| Model | B33DHW |
| Moisture Removal Capacity | 50 pints per day (at 80°F, 60% RH) |
| Room Size Coverage | Up to 2,500 sq ft |
| Dimensions (H x W x D) | 24 x 15 x 12 inches |
| Weight | 45 lbs |
| Power Supply | 115V, 60Hz, 4.5 amps |
| Power Consumption | 500 watts (estimated) |
| Water Tank Capacity | 12 pints |
| Control Type | Electronic with digital humidity display |
| Humidistat | Built-in, adjustable (30-80% RH) |
| Fan Speeds | 2 (Low, High) |
| Defrost Function | Automatic defrost at low temperatures |
| Continuous Drain Option | Yes, via garden hose (not included) |
| Air Filter | Washable, permanent filter |
| Filter Maintenance | Clean every 30 days; replace if damaged |
| Safety Features | Auto shut-off when bucket full, tip-over protection |
| Refrigerant Type | R-410A (environmentally friendly) |
| Noise Level | 53 dB (high fan speed) |
| Operating Temperature | 41°F to 95°F |
| Energy Efficiency | Energy Star compliant (model dependent) |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - B33DHW BROAN
How do I set the desired humidity level on my Broan B33DHW dehumidifier?
Press the Humidistat button repeatedly to cycle through humidity settings from 30% to 80% relative humidity. The display will show the set point. Release when the desired level is shown.
The water tank is full even though the dehumidifier has been running for only a few hours. Is this normal?
Yes, especially in very humid conditions. The B33DHW can remove up to 50 pints per day. Check the continuous drain option to avoid frequent emptying.
How often should I clean the air filter?
The filter should be cleaned every 30 days to maintain efficiency. Remove the filter, rinse with water, and allow to dry completely before reinstalling.
My dehumidifier is not collecting water. What could be the issue?
Check the humidistat setting: ensure it is set below current room humidity. Also, verify the room temperature is above 41°F. If the coil is frozen, the auto defrost function will activate.
Can I use a garden hose for continuous drainage?
Yes, attach a standard 3/4-inch garden hose (not included) to the continuous drain outlet at the back of the unit. Ensure the hose slopes downward for proper drainage.
The display shows 'CL' or 'FL'. What does this mean?
'CL' indicates the unit is in continuous mode, running nonstop regardless of humidity. Press the Mode button to change. 'FL' means the water bucket is full – empty it.
Is it safe to leave the dehumidifier running unattended?
Yes, the B33DHW has safety features like auto shut-off when the bucket is full and tip-over protection. However, always place it on a level, stable surface.
What is the recommended humidity level for my home?
The EPA recommends keeping indoor relative humidity between 30% and 50%. Use the built-in humidistat to adjust accordingly.
How do I reset the dehumidifier after a power outage?
Simply press the Power button to restart. The unit will resume operation with the previous settings. If not, unplug for 10 seconds and plug back in.
Where can I find a replacement filter for my Broan B33DHW?
Replacement filters can be ordered from authorized Broan dealers or online. Use model B33DHW to ensure compatibility. The filter is washable and may not need replacement often.
User questions about B33DHW BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual B33DHW - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B33DHW by BROAN.