Plena PLE-1ME60 - Mixer BOSCH - Free user manual and instructions
Find the device manual for free Plena PLE-1ME60 BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Mixer |
| Brand | Bosch |
| Model | Plena PLE-1ME60 |
| Dimensions (H x W x D) | 44 mm x 483 mm x 200 mm (1U, 19") |
| Weight | 2.8 kg |
| Power Supply | 100 - 240 V AC, 50/60 Hz |
| Power Consumption | 30 W |
| Input Channels | 6 mono microphone/line inputs |
| Output | 2 balanced XLR main outputs, 1 monitor output |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal-to-Noise Ratio (SNR) | > 90 dB |
| Equalization | 3-band EQ per channel (low, mid, high) |
| Phantom Power | +48 V selectable per channel |
| Mounting | 19" rack-mountable, 1U |
| Cooling | Passive (convection) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 20% to 80% (non-condensing) |
| Accessories Included | Power cord, rackmount ears, user manual |
| Certifications | CE, RoHS |
| Maintenance | Clean with a dry cloth; no lubrication required |
| Safety | Class I equipment; ground connection essential |
| Spare Parts & Repairability | Contact Bosch service for replacements; fuses user-replaceable |
| General Information | Designed for public address and background music applications |
Frequently Asked Questions - Plena PLE-1ME60 BOSCH
How do I connect a microphone to the Plena PLE-1ME60?
Use a balanced XLR cable to connect your microphone to any of the 6 mono inputs. Ensure phantom power is enabled if required by the microphone type (switch on the rear panel or per channel).
Can I use line-level devices like CD players?
Yes, each input can accept line-level signals. Use a balanced 1/4" TRS or XLR cable. Adjust the input gain accordingly.
How do I adjust the EQ on a channel?
Each channel has three rotary knobs: LOW, MID, and HIGH. Turn clockwise to boost, counterclockwise to cut. The mid frequency is fixed at 2.5 kHz typically.
What is the maximum output power?
The Plena PLE-1ME60 is a line-level mixer, not an amplifier. It delivers up to +20 dBu balanced output. Connect it to an external amplifier.
Why is there no sound coming from the speakers?
Check that the mixer is powered on, the master volume is turned up, the channel faders are not at zero, and the mute buttons are off. Verify connections to the amplifier.
How do I use the monitor output?
The monitor output provides a separate mix controlled by the MONITOR volume knob. Use it for stage monitors or headphones (with a headphone amp).
Can I mount this mixer in a rack?
Yes, it is 1U high and 19" wide. Attach the included rackmount ears and secure with screws.
What type of power cable does it use?
It uses a standard IEC C14 inlet. The included power cord has a country-specific plug. Ensure voltage matches (100-240 V AC).
How do I clean the mixer?
Disconnect power. Use a soft, dry cloth to wipe the surface. Do not use liquids or abrasive cleaners. Keep ventilation slots clear.
Is there a built-in effects processor?
No, the Plena PLE-1ME60 is a basic mixer without effects. You can connect external effects via the insert jacks (if equipped) or between mixer and amplifier.
User questions about Plena PLE-1ME60 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual Plena PLE-1ME60 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Plena PLE-1ME60 by BOSCH.
USER MANUAL Plena PLE-1ME60 BOSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSCH
Model : Plena PLE-1ME60
Category : Mixer