MF289F - Router ZTE - Free user manual and instructions
Find the device manual for free MF289F ZTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4G LTE Router |
| Brand | ZTE |
| Model | MF289F |
| Dimensions (W x D x H) | 165 x 125 x 32 mm |
| Weight | 290 g |
| Input Power | DC 12V / 1.5A |
| Power Consumption | < 12 W |
| Processor | Qualcomm MDM9230 |
| Memory | 512 MB RAM / 256 MB Flash |
| Network Standards | IEEE 802.11a/b/g/n/ac |
| LTE Category | Cat6 (up to 300 Mbps down) |
| Wi-Fi Standard | 802.11ac Wave 2 |
| Number of LAN Ports | 4 x Gigabit Ethernet |
| USB Port | 1 x USB 2.0 (for storage or printer) |
| Antennas | 2 x Internal LTE / 2 x Internal Wi-Fi |
| Security Features | WPA2-PSK, Firewall, VPN Passthrough, DoS Protection |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Maintenance | Clean with dry soft cloth; keep vents free of dust |
| Spare Parts & Repairability | No user-serviceable parts; contact ZTE support for repairs |
| General Information | Supports SIM card slot for 4G LTE; web-based management interface |
Frequently Asked Questions - MF289F ZTE
How do I reset the ZTE MF289F to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds using a paperclip until all LEDs blink. The router will reboot with factory settings.
What is the default login for the router?
The default IP address is 192.168.0.1 or 192.168.1.1, username is admin and password is admin (or see label on router).
How can I change my Wi-Fi password?
Log into the web interface, go to Wi-Fi Settings > Security. Enter your new passphrase (at least 8 characters). Save and reboot.
Which LTE bands does the MF289F support?
It supports bands: B1/B3/B5/B7/B8/B20/B28 for LTE FDD and B38/B40/B41 for TDD. Check your carrier compatibility.
Can I use the router without a SIM card?
Yes, it can operate as a wired router using the Ethernet WAN port. Insert a SIM only for 4G mobile broadband.
How do I update the firmware?
Download the latest firmware from ZTE support. Log in, go to System Tools > Firmware Upgrade, select the file, and follow prompts. Do not power off during update.
The router overheats often. What should I do?
Ensure vents are not blocked. Place in a cool, ventilated area. Avoid direct sunlight. If consistently hot, contact support.
How can I connect a USB printer to the router?
Plug the printer into the USB port. Access the web interface: USB Settings > Print Server. Enable sharing and install printer drivers on your computer.
What is the maximum number of connected devices?
The router supports up to 32 devices simultaneously via Wi-Fi and wired connections.
How to clean the router?
Use a soft, dry microfiber cloth to wipe the exterior. Do not use liquids or sprays. Keep vents dust-free.
User questions about MF289F ZTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual MF289F - ZTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MF289F by ZTE.
USER MANUAL MF289F ZTE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZTE
Model : MF289F
Category : Router