4K13-HS - Projector Christie - Free user manual and instructions
Find the device manual for free 4K13-HS Christie in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Projector |
| Model | 4K13-HS |
| Brand | Christie |
| Resolution | 4K UHD (3840 x 2160) |
| Brightness | 13,000 Lumens |
| Light Source | Laser Phosphor |
| Contrast Ratio | 5000:1 (typical) |
| Dimensions (W x D x H) | 586 x 624 x 296 mm |
| Weight | 42 kg |
| Power Consumption | 1500 W (maximum) |
| Input Interfaces | HDMI, DVI, DisplayPort, HDBaseT, 3D Sync |
| Lamp Life | 20,000 hours (typical) |
| Noise Level | 45 dB |
| Lens Options | Motorized zoom, focus, and shift (optional lenses) |
| Color Coverage | Rec. 709, DCI-P3 |
| 3D Support | Yes, active 3D |
| Edge Blending | Yes |
| Warping | Yes, multi-point warping |
| Maintenance | Clean air filters regularly; lens cleaning with soft cloth; firmware updates via USB |
| Safety | Laser class 1; caution: hot surface; use grounded outlet |
| Spare Parts | Remote control, power cord, filter set, optional lenses |
| Manual Type | User manual (88 pages, PDF) |
Frequently Asked Questions - 4K13-HS Christie
How do I connect my Christie 4K13-HS to a computer?
Use an HDMI or DisplayPort cable from your computer to the corresponding input on the projector. Ensure the projector is powered on and select the correct input source via the remote or keypad.
What is the optimal projection distance for a 100-inch screen?
This depends on the lens installed. With the standard lens, the distance is approximately 2.5 to 4 meters. Refer to the lens calculation table in the manual for exact values.
How often should I clean the air filters?
Clean the air filters every 500 hours of operation or if the projector indicates a filter warning. Use a vacuum cleaner or compressed air to remove dust.
Can I replace the laser light source myself?
No, the laser module is not user-serviceable. Contact a Christie authorized service center for replacement.
Why is the projector not turning on?
Check the power cable and outlet. Ensure the power switch is on. If the projector is in standby, press the power button on the remote or projector. If the issue persists, check the status LEDs and consult the troubleshooting section.
How do I adjust the image size and focus?
Use the motorized zoom and focus controls on the remote or lens control panel. To adjust the image size, press the Zoom buttons; to focus, press Focus. Lateral shift is also available via the Shift buttons.
What is the maximum cable length for HDMI?
Active HDMI cables up to 15 meters are recommended for 4K signals. For longer distances, use a signal extender or HDBaseT.
Does the projector support 3D content?
Yes, it supports active 3D. You need 3D glasses and a compatible 3D source. Connect the 3D sync emitter to the projector's 3D sync port.
How do I update the firmware?
Download the latest firmware from the Christie website onto a USB drive. Insert the drive into the projector's USB port, navigate to System Settings > Firmware Update, and follow the on-screen instructions.
What are the spare parts available for this projector?
Available spare parts include the remote control, power cord, air filter set, and optional lenses. For lamp-based models, lamp modules are also available, but this model uses a laser light source.
User questions about 4K13-HS Christie
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual 4K13-HS - Christie and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4K13-HS by Christie.
USER MANUAL 4K13-HS Christie
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Christie
Model : 4K13-HS
Category : Projector