GS-2210-24P2S - Uncategorized Planet - Free user manual and instructions
Find the device manual for free GS-2210-24P2S Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed L2+ Gigabit PoE+ Switch |
| Ports | 24 x 10/100/1000BASE-T PoE+ (802.3at/af) + 2 x 1000BASE-X SFP |
| PoE Budget | 370W total (up to 30W per port) |
| Switching Capacity | 52 Gbps |
| Forwarding Rate | 38.69 Mpps (64-byte packets) |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q VLAN (up to 4K VLAN groups) |
| Quality of Service (QoS) | 8 priority queues, strict/WRR scheduling |
| Management | Web, CLI, SNMP v1/v2c/v3, RMON, Telnet, SSH, SSL |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (19-inch rackmount) |
| Weight | 3.2 kg |
| Power Supply | 100-240V AC, 50/60Hz, internal power supply |
| Power Consumption | Maximum 430W (with full PoE load) |
| Operating Temperature | 0°C to 50°C |
| Safety Certifications | CE, FCC Class A, RoHS |
| Maintenance | Clean with dry cloth; keep ventilation free |
| Spare Parts & Reparability | Contact Planet support; no user-serviceable parts |
| Warranty | 3 years limited warranty (depending on region) |
Frequently Asked Questions - GS-2210-24P2S Planet
How do I reset the GS-2210-24P2S to factory defaults?
Press and hold the reset button (located on the front panel) for at least 10 seconds while the device is powered on. The switch will reboot with factory settings.
What is the maximum PoE power per port?
Each port supports up to 30W (IEEE 802.3at) with a total budget of 370W. Ensure the total power draw does not exceed the budget.
Does this switch support VLAN configuration?
Yes, it supports 802.1Q VLAN with up to 4K VLAN groups. You can configure VLANs via the web interface or CLI.
How do I access the management interface?
By default, the switch has IP address 192.168.0.100. Connect a PC to any port and set a static IP in the same subnet (e.g., 192.168.0.50). Open a web browser and enter the IP. Username: admin, password: admin (change after login).
What is the difference between GS-2210-24P2S and non-PoE model?
The GS-2210-24P2S provides PoE+ power to connected devices (e.g., IP cameras, phones) directly via Ethernet cables. The non-PoE version does not supply power.
Can I use SFP modules for uplink?
Yes, the two SFP slots support standard 1000BASE-X modules (e.g., 1000BASE-SX/LX). Use compatible modules from Planet or other trusted brands.
How to update firmware?
Download the latest firmware from Planet's website. In the web interface, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What are the indicators for PoE status?
Each port has two LEDs: link/activity (green) and PoE status (amber). Amber on indicates PoE is active; off means no power delivery.
The switch gets hot. Is that normal?
Yes, high-power PoE switches generate heat. Ensure adequate ventilation (do not block side fans). Operating temperature range is 0°C to 50°C.
Can I manage the switch via command line?
Yes, you can use SSH or Telnet to access the CLI. The command set is similar to other managed switches (e.g., Cisco-like). Enable SSH for secure access.
User questions about GS-2210-24P2S Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GS-2210-24P2S - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-2210-24P2S by Planet.
USER MANUAL GS-2210-24P2S Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : GS-2210-24P2S
Category : Uncategorized