Esmi Sense FDP - Smoke detector SCHNEIDER - Free user manual and instructions
Find the device manual for free Esmi Sense FDP SCHNEIDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | Schneider |
| Model | Esmi Sense FDP |
| Dimensions (Diameter) | 100 mm |
| Height | 45 mm |
| Weight | 150 g |
| Power Supply | 3V CR123A Lithium Battery |
| Battery Life | Up to 10 years |
| Sensor Type | Photoelectric (Optical) |
| Detection Principle | Scattered light for smoke particles |
| Alarm Volume | 85 dB at 3 meters |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 95% RH (non-condensing) |
| Mounting Type | Ceiling or wall mount |
| Interconnectivity | Wireless interconnect (optional) |
| Test Button | Yes, for functional test |
| Silence Function | Hush button for temporary muting |
| Low Battery Warning | Intermittent chirp every 30-40 seconds |
| End-of-Life Warning | Intermittent chirp after 10 years |
| Certification | EN 14604, CE |
| Maintenance | Vacuum clean every 3 months |
| Spare Parts | Battery (CR123A) replaceable |
| Warranty | 5 years limited |
Frequently Asked Questions - Esmi Sense FDP SCHNEIDER
How do I install the Esmi Sense FDP smoke detector?
Mount the detector on the ceiling in a central location, away from corners and air vents. Use the included base plate and screws. Follow the manual for proper placement.
What type of battery does it use and how long does it last?
It uses a 3V CR123A lithium battery. The battery lasts up to 10 years under normal conditions.
How do I test the detector?
Press and hold the test button for a few seconds until the alarm sounds. Release to stop. Perform this test monthly.
What should I do if the alarm chirps intermittently?
An intermittent chirp every 30-40 seconds indicates a low battery. Replace the battery immediately. If the chirp persists, it may indicate end-of-life.
How do I silence a false alarm?
Press the hush/silence button to temporarily mute the alarm for 10-15 minutes. The detector will automatically reset.
Can the detector be interconnected with other alarms?
Yes, the Esmi Sense FDP supports wireless interconnectivity with compatible Schneider alarms. Refer to the manual for pairing instructions.
How often should I clean the detector?
Clean the detector every 3 months using a vacuum cleaner with a soft brush attachment to remove dust from the vents.
What does the end-of-life warning mean?
After 10 years, the detector will chirp every 30-40 seconds to indicate it needs replacement. Replace the entire unit.
Where should I not install the detector?
Avoid installing near kitchens (steam), bathrooms (humidity), garages (exhaust), or near air vents. Maintain at least 1 meter from lights and corners.
Is the detector suitable for use in caravans or boats?
Yes, but ensure it is installed away from extreme temperatures and humidity. The operating range is 0°C to 50°C.
User questions about Esmi Sense FDP SCHNEIDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual Esmi Sense FDP - SCHNEIDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Esmi Sense FDP by SCHNEIDER.
USER MANUAL Esmi Sense FDP SCHNEIDER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHNEIDER
Model : Esmi Sense FDP
Category : Smoke detector