ERA200AMYFB - Fan DAIKIN - Free user manual and instructions
Find the device manual for free ERA200AMYFB DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Fan |
| Brand | Daikin |
| Model | ERA200AMYFB |
| Fan Diameter | 52 inches (132 cm) |
| Weight | 5.5 kg (12.1 lbs) |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Motor Power | 70 W |
| Airflow Speed Settings | 3 speeds (Low, Medium, High) |
| Remote Control | Included (infrared) |
| Reversible Motor | Yes (summer/winter mode) |
| Timer Function | 1, 2, 4, 8 hours |
| Mounting Type | Ceiling mount |
| Minimum Installation Height | 2.3 m (7.5 ft) |
| Blade Material | ABS plastic |
| Blade Finish | White matte |
| Noise Level | ≤ 50 dB(A) (at max speed) |
| Cleaning | Wipe blades with a soft, dry cloth |
| Safety Features | Overheat protection, safety cable |
| Warranty | 2 years |
| Certifications | CE, RoHS |
Frequently Asked Questions - ERA200AMYFB DAIKIN
How to install the Daikin ERA200AMYFB ceiling fan?
Ensure the ceiling can support the fan weight (min. 50 kg). Turn off power at the circuit breaker. Assemble the mounting bracket, attach the fan motor, connect wires (matching colors), and attach blades. Refer to the manual for detailed steps.
Can the fan be used in winter?
Yes, the motor is reversible. In winter, set the fan to rotate clockwise at low speed to circulate warm air trapped near the ceiling.
How to clean the fan blades?
Use a soft, dry cloth or a damp cloth with mild detergent. Avoid abrasive cleaners. Ensure the fan is off and dry before use.
What should I do if the remote control stops working?
Check batteries (replace with new CR2032). Ensure no obstructions between remote and fan sensor. If problem persists, reset the fan by turning off power for 1 minute.
Is the fan suitable for outdoor use?
No, this fan is designed for indoor use only. Exposure to moisture may cause electrical hazards.
How to adjust the fan speed?
Use the remote control or pull chain (if equipped). Press the speed button to cycle through Low, Medium, and High.
What is the minimum ceiling height for installation?
The fan must be installed at least 2.3 meters (7.5 feet) above the floor to ensure safety.
The fan makes a clicking noise when operating. What's wrong?
Check that blades are balanced and screws are tight. A wobble or loose blade can cause noise. If noise persists, contact customer support.
Can I use a dimmer switch to control the fan?
No, this fan should not be used with a dimmer switch. Use only the supplied remote control or pull chain.
How to reset the fan after a power outage?
Turn off the fan and wait 30 seconds. Turn it back on using the remote control. If using a wall switch, cycle power off and on.
User questions about ERA200AMYFB DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual ERA200AMYFB - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ERA200AMYFB by DAIKIN.