BlueVenom XF190 - Welding machine Cigweld - Free user manual and instructions
Find the device manual for free BlueVenom XF190 Cigweld in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inverter welding machine |
| Model | BlueVenom XF190 |
| Brand | Cigweld |
| Welding Current Range | 20-190 A |
| Duty Cycle (40°C) | 60% at 190 A, 100% at 150 A |
| Input Voltage | 230 V AC, 1 phase, 50/60 Hz |
| Input Power | 6.5 kVA |
| Open Circuit Voltage | 60-70 V |
| Weight | 12 kg |
| Dimensions (L x W x H) | 440 x 220 x 320 mm |
| Cooling System | Fan forced |
| Welding Processes | MMA (stick), Lift TIG |
| Electrode Diameter | 1.6 - 5.0 mm |
| Thermal Overload Protection | Yes (self-resetting) |
| IP Rating | IP21S |
| Insulation Class | H |
| Maintenance | Regularly clean dust from vents and check cable connections |
| Safety Features | Thermal overload, over-voltage protection, short circuit protection |
| Spare Parts | Replaceable torch, electrode holder, earth clamp, fan |
| Repairability | Modular design, serviceable by qualified technician |
Frequently Asked Questions - BlueVenom XF190 Cigweld
What is the maximum welding current of the BlueVenom XF190?
The maximum welding current is 190 A.
What welding processes can the BlueVenom XF190 perform?
It supports MMA (stick) and Lift TIG welding.
What input voltage does the BlueVenom XF190 require?
It requires 230 V AC single phase, 50/60 Hz.
What is the duty cycle of the BlueVenom XF190?
At 40°C, the duty cycle is 60% at 190 A and 100% at 150 A.
Can I use the BlueVenom XF190 for TIG welding?
Yes, it can perform Lift TIG welding with a TIG torch.
What electrode sizes can be used with the BlueVenom XF190?
It can weld electrodes from 1.6 mm to 5.0 mm diameter.
Does the BlueVenom XF190 have thermal overload protection?
Yes, it has a self-resetting thermal overload protection.
What is the weight of the BlueVenom XF190?
The machine weighs approximately 12 kg.
How do I maintain the BlueVenom XF190?
Regularly clean the vents from dust and check all cable connections for wear.
Can the BlueVenom XF190 be used for gasless welding?
Yes, it uses flux-cored wire (FCAW) when set for MMA mode with appropriate polarity.
User questions about BlueVenom XF190 Cigweld
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual BlueVenom XF190 - Cigweld and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BlueVenom XF190 by Cigweld.
USER MANUAL BlueVenom XF190 Cigweld
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cigweld
Model : BlueVenom XF190
Category : Welding machine