CP4435-RGB - Projector Christie - Free user manual and instructions
Find the device manual for free CP4435-RGB Christie in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | RGB Laser Projector |
| Resolution | 4K UHD (4096 x 2160) |
| Brightness | 35,000 lumens |
| Light Source | RGB Laser |
| Contrast Ratio | 2000:1 |
| Weight | 150 kg (approx.) |
| Dimensions (W x D x H) | 1300 x 700 x 600 mm |
| Power Consumption | 3500 W (max) |
| Voltage | 200-240 V AC, 50/60 Hz |
| Lens | Interchangeable (optional) |
| Image Size | Up to 30 m width |
| Operating Temperature | 5°C to 40°C |
| Color Gamut | DCI-P3, Rec.2020 |
| Inputs | Dual 3G-SDI, HDMI 2.0, DisplayPort 1.2 |
| Networking | Ethernet, RS-232 |
| 3D Compatibility | Active 3D |
| Warranty | 3 years limited |
| Maintenance | Filter cleaning every 2000 hours |
| Laser Source Life | 30,000 hours |
| Safety Rating | Class 1 Laser Product, CE, FCC |
| Repairability | Modular design, user-replaceable filters |
Frequently Asked Questions - CP4435-RGB Christie
How to clean the projector's filters?
Clean the air filters every 2,000 hours using a vacuum cleaner or soft brush. Do not use water. Refer to the user manual for filter location.
What is the recommended projection distance?
The recommended distance depends on the lens and desired image size. For a 10 m wide image, typical throw ratio is 1.5-2.0:1. Use the Christie lens calculator for precise values.
How to connect external devices?
Connect via HDMI 2.0, DisplayPort 1.2, or 3G-SDI. Ensure the source outputs the correct resolution (up to 4096x2160 at 60Hz).
Can the projector be used in portrait mode?
Yes, the CP4435-RGB supports portrait orientation. Enable the setting in the on-screen menu. Ensure proper ventilation and mount securely.
What is the expected lifetime of the laser source?
The laser source is rated for 30,000 hours (typical) before requiring replacement. Brightness may degrade over time.
How to update the firmware?
Download the latest firmware from the Christie website. Copy to a USB drive, insert into the projector's USB port, and navigate to Settings > Firmware Update. Do not power off during update.
What are the safety precautions?
Avoid looking directly into the lens. The projector is a Class 1 Laser Product. Ensure proper ventilation and use a circuit breaker. Do not block vents.
How to adjust the lens shift?
Lens shift is manual or motorized depending on the lens. Use the Lens Shift controls on the projector or remote to move the image vertically/horizontally.
Why is the projector overheating?
Common causes: dirty filters, blocked vents, high ambient temperature, or fan failure. Check the filter cleaning indicator and ensure the projector has 50 cm clearance.
How to mount the projector?
Use a Christie-approved mount rated for 150 kg. Securely attach to ceiling truss or brackets. Ensure the mounting surface can support the weight.
User questions about CP4435-RGB Christie
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual CP4435-RGB - Christie and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP4435-RGB by Christie.
USER MANUAL CP4435-RGB Christie
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Christie
Model : CP4435-RGB
Category : Projector