AVR-X4800H - Receiver DENON - Free user manual and instructions
Find the device manual for free AVR-X4800H DENON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Denon |
| Model | AVR-X4800H |
| Channels | 9.2 |
| Power Output (8 ohms, 20Hz-20kHz, 2ch driven) | 125 W per channel |
| Dimensions (W x H x D) | 434 x 167 x 378 mm |
| Weight | 13.4 kg |
| Power Consumption | 680 W |
| Standby Power Consumption | 0.1 W |
| HDMI Inputs | 6 (including front) |
| HDMI Outputs | 3 (1 with eARC) |
| Video Support | 8K/60Hz, 4K/120Hz, HDR10+, Dolby Vision, HLG |
| Audio Formats | Dolby Atmos, DTS:X, Auro-3D, DTS Virtual:X |
| Networking | Wi-Fi, Bluetooth, Ethernet |
| Multi-room | HEOS Built-in |
| Voice Control | Amazon Alexa, Google Assistant, Apple AirPlay 2 |
| Room Calibration | Audyssey MultEQ XT32 |
| Cleaning | Use a dry, soft cloth. Do not use liquids or solvents. |
| Safety | Disconnect power before cleaning. Do not block ventilation. |
| Repair and Spare Parts | Contact Denon support or authorized service centers. |
Frequently Asked Questions - AVR-X4800H DENON
How do I connect my speakers to the AVR-X4800H?
Use the color-coded binding posts on the rear panel. Ensure proper polarity (red to +, black to -). For detailed wiring, refer to the Speaker Setup section in the manual.
Can the AVR-X4800H support 8K video?
Yes, it supports 8K/60Hz and 4K/120Hz pass-through with HDMI 2.1 inputs. Make sure your source and TV are compatible.
How do I set up the HEOS multi-room system?
Download the HEOS App on your smartphone, connect the receiver to your home network, and follow the in-app instructions to add rooms and speakers.
What is the recommended placement for the AVR-X4800H?
Place the receiver on a stable, flat surface with at least 5 cm clearance on top and sides for ventilation. Avoid direct sunlight and moisture.
How do I run Audyssey calibration?
Connect the supplied microphone to the setup mic jack, place it at ear level at the main listening position, and go to Setup > Audyssey. Follow the on-screen prompts.
The receiver turns off suddenly. What could be the cause?
This may be due to overheating or speaker wiring issues. Check for proper ventilation, lower the volume, and inspect speaker connections for shorts. If the problem persists, reset the unit.
Can I use Bluetooth headphones with the AVR-X4800H?
Yes, the receiver supports Bluetooth audio transmission to headphones. Activate Bluetooth in the settings and pair your headphones.
How do I perform a factory reset?
While the unit is on, press and hold the DIMMER and STATUS buttons on the front panel for 3 seconds. Then press the power button to restart.
What HDMI cable should I use for 8K content?
Use a certified Ultra High Speed HDMI 2.1 cable to ensure full 48Gbps bandwidth and reliable 8K/60Hz or 4K/120Hz transmission.
How do I update the firmware?
Connect the receiver to the internet via Ethernet or Wi-Fi. Go to Setup > General > Firmware Update and select Update via Network. Do not power off during the update.
User questions about AVR-X4800H DENON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AVR-X4800H - DENON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVR-X4800H by DENON.
USER MANUAL AVR-X4800H DENON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DENON
Model : AVR-X4800H
Category : Receiver